6 x 6 x 6 Cubic Modular Vacuum Chamber Heated Development Kit with Viewing Window Door and KF Ports, 1/8 Cu. Ft.

This is an Ideal Vacuum Cube modular ready-to-assemble heated chamber development kit preppes with KF-16 and KF-40 ports and an easy-to-open door with viewing window. It includes everything needed to assemble a 0.125 cu. ft. vacuum chamber including a 6 x 6 x 6 inch Cube frame, six 6 x 6 inch Cube plates (one heated and one is a door with viewing window), all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench.

Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed.

This 6 x 6 x 6 heated chamber development kit includes:

• Cube frame (P106861)
• Cube assembly hardware kit (P107293, includes plate seals and mounting screws)
• Cube plate with four KF-16 ports (P106866)
• Cube plate with one centered KF-40 port (P106863)
• Two blank plates (P106862)
• Heater plate for up to 140°C (P108319)
• One door kit with tempered glass viewing window, hinge, and quick knobs for easy opening
• Offset rubber vibration isolating foot kit
• Centering rings, bulkhead clamps, and blanks for all ports

Note that the heater plate requires a heater plate controller such as the IVP single zone PID plug & play heater control system (P107361)

Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions.
Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.