Pfeiffer Connection Cable with Three M8 Accessory Ports for OmniControl 200 Controller to TC 80 / TC 110 Electronic Turbo Pump Drive Units.
Pfeiffer Part Number: PM 061 512-T.
This 3 meter long cable supplies power from a Pfeiffer OmniControl 200 or DCU-110 turbo pump controller to the integrated TC 110 on Pfeiffer HiPace 80, and HiPace 300H, or the TC 80 electronic drive unit on HiPace 80 Neo turbopumps. A 15-pin D-Sub connector on one end of the cable plugs into the TC 110 drive unit. The D-Sub connector splits out into two cables: The 3 meter long, heavy 3 conductor cable connects to the OmniControl 200 or DCU 110 unit and supplies 24 VDC power to the TC 110 and pump. The short cable emanating from the D-Sub connector is for communications. This short cable is extended with a 3 meter long RS485 extension cable (part number P1012287) which then connects to the OmniControl 200 or DCU-110 controller, allowing it to manage all main parameters and functions of the turbo pump.
The 15-pin D-Sub connector is modified to include three M8 connectors in its side. These are accessory ports used to connect optional accessories such as a forced air-cooling kit, a solenoid vent valve, and/or a sealing gas valve. When adding accessories, make sure that the total power draw does not exceed the capacity of the controller. This three-accessory power and communication connection cable has Pfeiffer part number PM 061 512-T.
