Optical Breadboard 8 x 10 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized Aluminum

These non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 8 x 10 inches and is 0.5 inches thick.

The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured.

Five counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Four holes are inset 1 inch from each corner, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet.

The breadboard has a specified flatness of 0.006 inches over 1 ft².

Common Dimensions & Specs:

• Width: 8 in.
• Length: 10 in.
• Thickness: 0.5 in.
• Material: Non-Magnetic Aluminum
• Finish: Blue Anodized
• Tapped Holes: 1/4"-20
• Hole Pattern: 1 in. standard optical table breadboard pattern
• First Row of Holes: 0.5 in. from edge
• Counterbored Holes: Five for 1/4 in. socket head cap screws
• Counterbore Locations: 1 in. inset from each corner and one in the center
• Flatness: 0.006 in. over 1 ft²