Venta: ₡258,683.34
| Specifications | |||
|---|---|---|---|
| Specification | Value | ||
| Optimum Operating Range | 2x10⁻³ Torr (2.7 mbar) to < 5x10⁻⁸ Torr (6.7 mbar) | ||
| Maximum Pumping Speed | 285 l/s, Air | ||
| Maximum Throughput (Air), Max. | 0.5 Torr l/s (.67 mbar) | ||
| Maximum Forepressure | No Load 5.5 x 1010⁻± (.73 mbar) Full Load 4.0 x 1010⁻± (.53 mbar) |
||
| Backstreaming Rate at Pump Inlet | 1x10⁻³ mg/cm2/min (with cold cap) | ||
| Power Requiered (Approximately) | 450 Watts | ||
| Warmup Time | 15 minutes | ||
| Cooldown Time | Less than 5 minutes to break jet Less than 10 minutes to vent pump |
||
| Fluid Charge | 100 cc All conventional and high performance pump fluids | ||
| Cooling Water Requirements | 0.1 gpm at 60° °F (15.6 ° °C to 26.7 ° °C) Inlet temperature | ||
| Backing Pump Size | 5 cfm or larger for optimum throughput | ||
| Description | Part No. | Item |
|---|---|---|
| Heaters (one heater required per pump) | 1 | |
| 120 V / 450 watt Heater Assembly | 647302125 | 5.1 |
| 240 V / 450 watt Heater Assembly | 647302150 | 5.1 |
| Heater Block | 82920001 | 2 |
| Heater Platen | 82918301 | 3 |
| Jet Assembly | F0310301 | 4 |
| Top Cap | 5 | |
| Cold Cap Assembly | F0600301 | 6 |
| Teflon Button | F0597001 | 7 |
| Butly O-ring Kit, Parker 2-238 for 2in DP | K0377159 | 8 |
| Foreline Baffle | 84166301 | 9 |
| Baffle Retaining Ring | 660156010 | 10 |
| Heater Clip | 648018010 | 11 |
| 2-56 x 1/8 R.H.M.S. SS | Standard | 12 |
| #4-40 x 3/16 Rd. Hd. MS Ni-Plated | Standard | 13 |
| 10-32 Hex Hd. SS | 648018010 | 14 |
| 1/4 - 20 x 13/8, Hex. Hd. Cap Screw/Lock Washer SS | Standard | 15 |
| Reflector | 82917301 | 16 |
| Santovac 5 diffusion pump fluid, 100 cc | P102288 |
Press ESC to Close
