These Leybold start/stop switches can be used to remotely turn the turbo pump on and off. When the Turbo.Controller 300 is in remote mode (remote switch is located on the back of the controller) the start/start switch is needed to start the turbo. The switch can be mounted at a distance, for example, in your control panel, by using a straight through RS-232 extension cable. The TURBO.DRIVE 400 requires a supply voltage of 24 V DC. It is equipped with interfaces for programmable controls (Remote Switch PID: P105455). This new generation of SL TURBOVAC turbomolecular pumps have improved mechanical rotor suspension and compound stage excels through a new compact design, improved vacuum performance and a standardized accessories program. The SL series pumps are among the quietest turbo pumps on the market today, the SL 80 pumps have less than 46 dB(A). The Leybold SL-80 with ISO-63 inlet flange has a 65 l/s pumping speed for nitrogen, can have an ultimate pressure as low as 1.5x10-10 Torr when backed with oil sealed rotary vane pump, and has a KF-16 roughing flange.

This is a Leybold power cord (mains cable), 115 VAC, 3m long, with US plug 5-15P to C13 Connector, IEC 60320. This OEM power cord is for:TURBO.POWER Integra power supply This Leybold 3 meter long power cord has Leybold part number 800102V1002.

PN: 800100V0002 The Leybold TURBO.POWER 300 is a power supply unit for powering the frequency converter TURBO.DRIVE S with 24 VDC are used with the SL series turbo pumps. The mains input is protected by two fuses. In connection with the TURBO.DRIVE S the following turbomolecular pumps may be operated: TW 70H, TW 250S, TW 220/150, TW 220/150/15, TW 300, TW 300H, SL-80 and SL-300. The TURBO.POWER 300 can be set up on the benchtop. After having unscrewed the feet, the unit may be installed in electrical cabinets, for example. It can be mounted using either the grooves and bores at the short sides in the bottom panel or with the aid of an adaptor the unit can be affixed to hat rails. Attach the hat rail adaptor to the bottom panel using screws.