These Ideal Vacuum radial air fan cooling kits fit all Agilent Varian Twistorr 74FS, 84FS, and Turbo-V 81 turbomolecular vacuum pumps, and provide air flow perpendicular to the pump. These kits are a direct replacement for Agilent Varian part number: 9699290. The fan is mounted to an L-shaped bracket which mounts to the bottom of the pump with eight included M3 screws. The fan can be conveniently oriented in multiple positions. The fan has a 50 cm cable with a USB-B male connector which connects to and is powered by the on-board or rack mounted turbo controller. A 5-meter fan extension cable, PN: P1011992, sold separately, is needed for use with rack mounted controllers.

Agilent Vacuum Part Number PN: X3500-68010 This Agilent Varian 305-IC (with Integrated Controller) fan air cooling kit can be powered directly by 24V DC or using the fan output from the integrated controller. This Fan Kit when powered by 305-IC turbo's integrated controller must also be used with an adapter kit Agilent PN (X3514-68001, see middle graphic to the side) that connects on to the integrated controller on the 305-IC turbo pump. For fan install instructions see pages 250-254 in the Agilent 305-IC TwisTorr turbomolecular user manual in pdf format below.

This is an air fan cooling kit for Agilent TwisTorr 305 FS turbomolecular vacuum pumps. It mounts to the base of the pump, and provides radial cooling to the pump. The fan cable plugs into the J6 FAN connector on the back of the rack mounted X3500-68011 turbo pump controller. This fan air cooling kit has an attached 2 ft. long cable and includes all necessary mounting hardware. This is a direct replacement for the Agilent X3501-68011 fan air cooling kit. A 5 meter fan extention cable, part number P10553 (Agilent PN: 89699940) is also available. This fan kit is not compatible with Agilent Onboard Navigator Turbo Pump Controllers. We offer fan cooling kits for onboard controllers, as well as the complete line of Agilent Turbo pumps and accessories in other listings. Please see the downloads for more information about TwisTorr turbo pumps and controllers.

These Agilent Varian Turbo-V 551 and Turbo-V 701 Pump air cooling fan kits are designed to work with the V550 or V700HT rack-mount controllers and have Agilent Varian Part Number 9699314. These kits include the air cooling fan, power cable to connect the cooling fan to 120 VAC supply on the auxiliary power J6 connectors (1 Amp max output) on back side of V550 or V700HT rack-mount controller, and bottom of pump mounting style bracketing.

These Agilent Varian air cooling fan kits are designed to work with the V 1000HT rack-mount controllers. These kits include the air cooling fan, power cable to connect the cooling fan to 120 VAC supply on the auxiliary power J6 connectors (1 Amp max output) on back side of V1000HT rack-mount controller, and bottom of pump mounting style bracketing. This is very important when ordering! There are two different air cooling fan kits for the Agilent Varian Turbo-V 1001 turbo molecular pumps: This unit is designed to work with the Rack-Mount V1000 HT controller which is being sold here where the cooling fan operates on 120 VAC. The other is designed to work with the bottom or side mounted Navigator V1001 controller where the cooling fan operates on 24 VDC having Agilent Varian part number 9699297. These are different products and care must be taken when order a system from individual components.

This is an air fan cooling kit for Agilent TwisTorr FS 404, 704, 804 and Turbo-V 1001 turbomolecular vacuum pumps. It mounts to the base of the pump, and provides radial cooling to the pump. It connects to the round J3 FAN connector on the back of rack mounted X3501-68016 or X3501-64003 turbo pump controllers. This fan air cooling kit has an attached 20 ft. long cable and includes all necessary mounting hardware. This is a direct replacement for the Agilent X3501-68001 fan air cooling kit. Compatible with these Agilent Turbomolecular Pump Models:TwisTorr 404 FSTwisTorr 704 FSTwisTorr 804 FSTurbo-V 1001Compatible with these Rack Mount Agilent Turbomolecular Pump Controller Models:

These Agilent Varian TwistTorr and Turbo-V air cooling fan kits are designed to work with the local Navigator (bottom or side pump mounted) controllers and have Agilent Varian part number 9699297. These kits include the air cooling fan, power cable to connect the cooling fan to 24 VDC supply on the Navigator controller through a P4 connector, and bottom of pump mounting style bracketing. This is very important when ordering, there are two different air cooling fan kits for the Agilent Varian large TwistTorr and Turbo-V turbo molecular pumps: one is designed to work with the remote Rack-Mount controller where the cooling fan operates on 115 VAC. The other which is being sold here, is designed to work with the bottom or side mounted local Naviagator controller operating on 24VDC (see middle graphic to the side) .

These Agilent Varian Turbo-V 551, V 701 pumps air cooling fan kits are designed to work with the Navigator bottom or side mount controllers (Turbo-V 551, Turbo-V 701) and have Agilent Varian Part Number 9699339. These kits include the air cooling fan, power cable to connect the cooling fan to 24 VDC supply on the Navigator controller through P4 connector, and bottom of pump mounting style bracketing.

These Agilent Varian TwissTorr turbo pump water cooling kits are metal with plastic water line connections. They are designed to mount to the bottom of the Agilent TwissTorr turbomolecur vacuum pumps. A water cooling kit is used under heavy load conditions or when air cooling is insufficient. The assembled kit must be screwed into the suitable holes of the pump body with a recommended closing torque of 5 Nm (3.69 ft/lb). Cooling may be carried out either through an open circuit with eventual discharge of the water, or using a closed circuit cooling system. The water temperature must be between +15 °C and +25 °C, with an inlet pressure between 2 and 4 bar. This allows a flow higher than 65 l/h.

These Agilent Varian V81 turbo pump water cooling kits are stainless steel with stainless steel line connections. They are designed to mount to the bottom of the V81T and V81M turbo molecular vacuum pumps. These kits include the hardware needed for properly installation on the turbo pump and have Agilent Varian part number 9699823. The installation instructions can be found by downloading the pdf catalog and documents below. With the Turbo-V 81 turbo molecular pumps, and thanks to one of the features of the MacroTorr® technology you can now reduce the cost of your vacuum system and get better performance at the same time. These Varian Turbo V81 pumps, series T or M, have the most effective pumping stage technology currently available. It is designed for Very High gas load operations, has a monolithic rotor and maintenance free ceramic ball bearings. With no oil, no refill, and no contamination. Now with T-Plus Software you can connect your laptop directly to the pump control unit and start to use it. You can start or stop the pump, as well as check its temperature, gas load conditions, parameters and diagnostics.

These Agilent Varian TwissTorr turbo pump water cooling kits are metal with plastic water line connections. They are designed to mount to the bottom of the Agilent TwissTorr turbomolecur vacuum pumps. A water cooling kit is used under heavy load conditions or when air cooling is insufficient. The assembled kit must be screwed into the suitable holes of the pump body with a recommended closing torque of 5 Nm (3.69 ft/lb). Cooling may be carried out either through an open circuit with eventual discharge of the water, or using a closed circuit cooling system. The water temperature must be between +15 °C and +25 °C, with an inlet pressure between 2 and 4 bar. This allows a flow higher than 65 l/h.

These metal water cooling kits are designed to provide water cooling of Agilent Varian TwisTorr 305 FS, 750 FS, and 850 FS turbomolecular vacuum pumps. They are designed to allow easy connection to 6 mm I.D. x 8 mm O.D. plastic hose, e.g., high quality Polyurethane (PUR), and have Agilent Varian part number PN 9699337. Fits most Agilent Varian turbo pumps, including models:TwisTorr 305 FSTwisTorr 305 ICTwisTorr 404 FSTwisTorr 704 FSTwisTorr 804 FSTubro-V 1001

These fan extension cables are used with Agilent Varian TwisTorr 305-IC (Integrated Controller) turbo pumps. The TwisTorr 305 FS is a compact, reliable, energy efficient 300 l/s turbo drag pump with innovative breakthrough technologies that have lead to outstanding performace. They are designed for reliability and feature the new Agilent floating suspension. This ensures that the turbo has low vibration, low acoustical noise, optimal working conditions for the bearings with extended operating life and exceptional stability for demanding SEM applications. The base pressure for the TwisTorr 305 FS is as low as 1x10 Torr when backed with the recommended roughing pump. The turbo has a KF-16 roughing flange and an option to replace with the KF-25 roughing flange (pn: X3513-68000). Please see the available instruction manuals in our PDF download section Below.