These rugged feedthroughs are UHV rated and bakeable to 450° C and have a weldable 0.747 in. diameter stainless steel insulated sub-assembly. Features Include: Common Dimensions: A = 5.55", B = 2.43", C = 0.747" Feedthrough Diameter: 0.747" Material: Stainless Steel, Nickel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This air-side keyed, push-on circular connector features 10 female receivers accepting 10 amps per pin in either 0.056 in. or 0.062 in. diameter. Maximum 700 V total. Overall diameter is 1.3 in. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber. CF Conflat flanges are normally for processes requiring ultra high vacuum pressures, down to 10-12 Torr, and are vacuum sealed via nuts and bolts with copper gaskets. They come in sizes from 1.33 in. (mini conflat), 2.75, 4.5, 6, 8, 10, 12, 13.25, 14 and 16.5. inch O.D. Outer Diameter.

Nickel electrical feedthroughs convey high voltage-high amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications. These rugged nickel power feedthroughs are UHV rated and bakeable to 450° C and have a weldable 0.154 in. diameter insulated sub-assembly. Features Include: Common Dimensions: A = 2.5", B = 1", C = 0.154" Feedthrough Diameter: 0.154" Material: Stainless Steel, Nickel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

Copper electrical feedthroughs convey low-voltage electrical power into high-vacuum environments. These rugged copper power feedthroughs are UHV rated and bakeable to 450° C. Features Include: Common Dimensions: A = 2.5", B = 1.5", C = 0.497" Feedthrough Diameter: 0.497" Material: Stainless Steel, Copper Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

Nickel electrical feedthroughs convey high voltage-high amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications. These rugged nickel power feedthroughs are UHV rated and bakeable to 450° C and have a weldable 0.247 in. diameter insulated sub-assembly. Features Include: Common Dimensions: A = 3.96", B = 2.1", C = 0.247" Feedthrough Diameter: 0.247" Material: Stainless Steel, Nickel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

Molybdenum electrical feedthroughs convey high voltage-high amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications. These rugged molybdenum power feedthroughs are UHV rated and bakeable to 450° C and have a weldable 0.247 in. diameter insulated sub-assembly. Features Include: Common Dimensions: A = 3.96", B = 2.1", C = 0.247" Feedthrough Diameter: 0.247" Material: Stainless Steel, Molybdenum Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

Nickel electrical feedthroughs convey high voltage-high amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications. These rugged nickel power feedthroughs are UHV rated and bakeable to 450° C and have a weldable 0.435 in. diameter insulated sub-assembly. Features Include: Common Dimensions: A = 7.25", B = 2.25", C = 0.435" Feedthrough Diameter: 0.435" Material: Stainless Steel, Nickel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

Copper electrical feedthroughs convey high voltage-high amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications. These rugged copper power feedthroughs are UHV rated and bakeable to 450° C and have a weldable 0.247 in. diameter insulated sub-assembly. Features Include: Common Dimensions: A = 3.96", B = 2.1", C = 0.247" Feedthrough Diameter: 0.247" Material: Stainless Steel, Copper Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This power feedthrough is a weld-on type for a suitable through-hole on a vacuum flanged fitting. It is a copper electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experimentations. These rugged copper power feedthroughs are UHV rated, bakeable to 450° C, have a 0.435 in. diameter insulated sub-assembly and are weldable. Features Include: Common Dimensions: A = 7.25", B = 2.25", C = 0.435" Feedthrough Diameter: 0.435" Material: Stainless Steel, Copper Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

Nickel electrical feedthroughs convey high voltage-high amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications. These rugged nickel power feedthroughs are UHV rated and bakeable to 450° C and have a weldable 0.622 in. diameter insulated sub-assembly. Features Include: Common Dimensions: A = 7.24", B = 3.14", C = 0.622" Feedthrough Diameter: 0.622" Material: Stainless Steel, Nickel Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This electrical power feedthrough is a weld-on type for a suitable through-hole on a vacuum flanged fitting. It is a copper electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experimentations. These rugged copper power feedthroughs are UHV rated, bakeable to 450° C, have a 0.495 in. diameter insulated sub-assembly and are weldable. Features Include: Common Dimensions: A = 7.22", B = 2.32", C = 0.495" Feedthrough Diameter: 0.495" Material: Stainless Steel, Copper Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

This electrical power feedthrough is a weld-on type for a suitable through-hole on a vacuum flanged fitting. It is a copper electrical feedthrough and conveys high-voltage, high-amperage power into high-vacuum environments for operating heating coils in sputtering, coating and other demanding material evaporation applications or experimentations. These rugged copper power feedthroughs are UHV rated, bakeable to 450° C, have a 0.622 in. diameter insulated sub-assembly and are weldable. Features Include: Common Dimensions: A = 7.24", B = 3.14", C = 0.622" Feedthrough Diameter: 0.622" Material: Stainless Steel, Copper Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.

Water-cooled feedthroughs are intended for use with grounded, closed-loop cooling systems and non-conductive coolants such as deionized water. Standard conductor options for these feedthroughs include copper, nickel and stainless tubes. These water-cooled feedthroughs are rated for up to 50 Volts DC and up to 1000 Amps. Features Include: Common Dimensions: A = 3.97", B = 2.50", C = 2.00" Feedthrough Diameter: 1 in. Baseplate Material: Single Hollow Copper Conductor with Brass, Teflon, and Stainless Steel Fittings. Feedthroughs (or vacuum feedthroughs) come in many forms to transfer electrical currents, signals, fluids, gases or mechanical movements from outside the vacuum (air side) to the inside (vacuum side) of a vacuum chamber to equipment within the chamber. The entry point for the feedthrough must be vacuum-sealed via a suitable through hole. The feedthrough can be weldable (weld-on) or connected with a CF, KF or ISO vacuum flange to the vacuum chamber.