Swagelok VCR® 2 Short Tube Butt Weld Gland, 316 Stainless Steel, 1/8 in, OAL 1.08 in. PN: 6LV-2-VCR-3S-2TB7This Swagelok VCR® Short Tube Butt Weld Gland is made of 316 Stainless Steel. Swagelok® Part Number: 6LV-2-VCR-3S-2TB7. VCR® Butt Weld Glands, in conjunction with either male or female nuts, are typically welded (GTAW) in to manifiolds, plates or vacuum chambers to create ports, or are used to terminate tubing when a custom plumbing solution (i.e., gas manifold, connection to a source or sensor) is needed. These VCR® gland fittings are precision manufactured and offer a leak-tight, metal on metal seal. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. The VCR® gland fitting design has been tested to maximum leak rate of 4x10-11 std cm3/s. Specifications and Dimensions:316 Stainless Steel Tube Diameter: 1/8 in VCR® Nut Size: 2 Wall Thickness: 0.028 in A: 1.08 in (27.4 mm) C: 0.75 in (19.1 mm) E: 0.07 in (1.8 mm) Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok VCR® 4 Short Tube Butt Weld Gland, 316 Stainless Steel, 1/4 in, OAL 0.60 in. PN: 6LV-4-VCR-3S-4TB2This Swagelok VCR® Short Tube Butt Weld Gland is made of 316 Stainless Steel. Swagelok® Part Number: 6LV-4-VCR-3S-4TB2. VCR® Butt Weld Glands, in conjunction with either male or female nuts, are typically welded (GTAW) in to manifiolds, plates or vacuum chambers to create ports, or are used to terminate tubing when a custom plumbing solution (i.e., gas manifold, connection to a source or sensor) is needed. These VCR® gland fittings are precision manufactured and offer a leak-tight, metal on metal seal. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. The VCR® gland fitting design has been tested to maximum leak rate of 4x10-11 std cm3/s. Specifications and Dimensions:316 Stainless Steel Tube Diameter: 1/4 in VCR® Nut Size: 4 Wall Thickness: 0.035 in A: 0.60 in (15.2 mm) C: 0.25 in (6.4 mm) E: 0.18 in (4.6 mm) Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok VCR® 4 Short Tube Butt Weld Gland, 316 Stainless Steel, 1/4 in, OAL 1.10 in. PN: 6LV-4-VCR-3S-4TB7This Swagelok VCR® Short Tube Butt Weld Gland is made of 316 Stainless Steel. Swagelok® Part Number: 6LV-4-VCR-3S-4TB7. VCR® Butt Weld Glands, in conjunction with either male or female nuts, are typically welded (GTAW) in to manifiolds, plates or vacuum chambers to create ports, or are used to terminate tubing when a custom plumbing solution (i.e., gas manifold, connection to a source or sensor) is needed. These VCR® gland fittings are precision manufactured and offer a leak-tight, metal on metal seal. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. The VCR® gland fitting design has been tested to maximum leak rate of 4x10-11 std cm3/s. Specifications and Dimensions:316 Stainless Steel Tube Diameter: 1/4 in VCR® Nut Size: 4 Wall Thickness: 0.035 in A: 1.10 in (27.9 mm) C: 0.75 in (19.1 mm) E: 0.18 in (4.6 mm) Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok VCR® 8 Short Tube Butt Weld Gland, 316 Stainless Steel, 3/8 in, OAL 0.62 in. PN: 6LV-8-VCR-3S-6TB2This Swagelok VCR® Short Tube Butt Weld Gland is made of 316 Stainless Steel. Swagelok® Part Number: 6LV-8-VCR-3S-6TB2. VCR® Butt Weld Glands, in conjunction with either male or female nuts, are typically welded (GTAW) in to manifiolds, plates or vacuum chambers to create ports, or are used to terminate tubing when a custom plumbing solution (i.e., gas manifold, connection to a source or sensor) is needed. These VCR® gland fittings are precision manufactured and offer a leak-tight, metal on metal seal. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. The VCR® gland fitting design has been tested to maximum leak rate of 4x10-11 std cm3/s. Specifications and Dimensions:316 Stainless Steel Tube Diameter: 3/8 in VCR® Nut Size: 8 Wall Thickness: 0.035 in A: 0.62 in (15.7 mm) C: 0.25 in (6.4 mm) E: 0.31 in (7.9 mm) Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok VCR® 8 Short Tube Butt Weld Gland, 316 Stainless Steel, 3/8 in, OAL 1.12 in. PN: 6LV-8-VCR-3S-6TB7This Swagelok VCR® Short Tube Butt Weld Gland is made of 316 Stainless Steel. Swagelok® Part Number: 6LV-8-VCR-3S-6TB7. VCR® Butt Weld Glands, in conjunction with either male or female nuts, are typically welded (GTAW) in to manifiolds, plates or vacuum chambers to create ports, or are used to terminate tubing when a custom plumbing solution (i.e., gas manifold, connection to a source or sensor) is needed. These VCR® gland fittings are precision manufactured and offer a leak-tight, metal on metal seal. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. The VCR® gland fitting design has been tested to maximum leak rate of 4x10-11 std cm3/s. Specifications and Dimensions:316 Stainless Steel Tube Diameter: 3/8 in VCR® Nut Size: 8 Wall Thickness: 0.035 in A: 1.12 in (28.4 mm) C: 0.75 in (19.1 mm) E: 0.31 in (7.9 mm) Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok VCR® 12 Short Tube Butt Weld Gland, 316 Stainless Steel, 1/2 in, OAL 0.62 in. PN: 6LV-8-VCR-3S-8TB2This Swagelok VCR® Short Tube Butt Weld Gland is made of 316 Stainless Steel. Swagelok® Part Number: 6LV-8-VCR-3S-8TB2. VCR® Butt Weld Glands, in conjunction with either male or female nuts, are typically welded (GTAW) in to manifiolds, plates or vacuum chambers to create ports, or are used to terminate tubing when a custom plumbing solution (i.e., gas manifold, connection to a source or sensor) is needed. These VCR® gland fittings are precision manufactured and offer a leak-tight, metal on metal seal. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. The VCR® gland fitting design has been tested to maximum leak rate of 4x10-11 std cm3/s. Specifications and Dimensions:316 Stainless Steel Tube Diameter: 1/2 in VCR® Nut Size: 12 Wall Thickness: 0.049 in A: 0.62 in (15.7 mm) C: 0.25 in (6.4 mm) E: 0.40 in (10.2 mm) Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok VCR® 12 Short Tube Butt Weld Gland, 316 Stainless Steel, 1/2 in, OAL 1.12 in. PN: 6LV-8-VCR-3S-8TB7This Swagelok VCR® Short Tube Butt Weld Gland is made of 316 Stainless Steel. Swagelok® Part Number: 6LV-8-VCR-3S-8TB7. VCR® Butt Weld Glands, in conjunction with either male or female nuts, are typically welded (GTAW) in to manifiolds, plates or vacuum chambers to create ports, or are used to terminate tubing when a custom plumbing solution (i.e., gas manifold, connection to a source or sensor) is needed. These VCR® gland fittings are precision manufactured and offer a leak-tight, metal on metal seal. They can be used for any fluid flow application and provide leak-tight service from vacuum to positive pressure. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. The VCR® gland fitting design has been tested to maximum leak rate of 4x10-11 std cm3/s. Specifications and Dimensions:316 Stainless Steel Tube Diameter: 1/2 in VCR® Nut Size: 12 Wall Thickness: 0.049 in A: 1.12 in (28.4 mm) C: 0.75 in (19.1 mm) E: 0.40 in (10.2 mm) Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.