Swagelok® Tube Adapter Fitting, Reducer, 1/8 in. Swagelok® to 1/4" Tube Adapter, Stainless Steel. Swagelok® Part Number SS-200-R-4 This Swagelok® reducing tubing adapter fitting has a 1/8" standard Swagelok® compression fitting on one side, and a 1/4" tubing adapter on the other. The fitting is made of 316 stainless steel. The Swagelok® side of this adapter receives a 1/8" OD tube. The 1/4" tubing end uses an outward facing nut and ferrule set which then connects to a threaded male swagelok® fitting. A 1/4" nut and ferrule set is required and must be purchased separately. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok® Tube Adapter Fitting, Reducer, 1/8 in. Swagelok® to 3/8" Tube Adapter, Stainless Steel. Swagelok® Part Number SS-200-R-6 This Swagelok® reducing tubing adapter fitting has a 1/8" standard Swagelok® compression fitting on one side, and a 3/8" tubing adapter on the other. The fitting is made of 316 stainless steel. The Swagelok® side of this adapter receives a 1/8" OD tube. The 3/8" tubing end uses an outward facing nut and ferrule set which then connects to a threaded male swagelok® fitting. A 3/8" nut and ferrule set is required and must be purchased separately. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok® Tube Adapter Fitting, Reducer, 1/4 in. Swagelok® to 1/4" Tube Adapter, Stainless Steel. Swagelok® Part Number SS-400-R-4 This Swagelok® reducing tubing adapter fitting has a 1/4" standard Swagelok® compression fitting on one side, and a 1/4" tubing adapter on the other. The fitting is made of 316 stainless steel. The Swagelok® side of this adapter receives a 1/4" OD tube. The 1/4" tubing end uses an outward facing nut and ferrule set which then connects to a threaded male swagelok® fitting. A 1/4" nut and ferrule set is required and must be purchased separately. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok® Tube Adapter Fitting, Reducer, 1/4 in. Swagelok® to 3/8" Tube Adapter, Stainless Steel. Swagelok® Part Number SS-400-R-6 This Swagelok® reducing tubing adapter fitting has a 1/4" standard Swagelok® compression fitting on one side, and a 3/8" tubing adapter on the other. The fitting is made of 316 stainless steel. The Swagelok® side of this adapter receives a 1/4" OD tube. The 3/8" tubing end uses an outward facing nut and ferrule set which then connects to a threaded male swagelok® fitting. A 3/8" nut and ferrule set is required and must be purchased separately. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok® Tube Adapter Fitting, Reducer, 3/8 in. Swagelok® to 1/2" Tube Adapter, Stainless Steel. Swagelok® Part Number SS-600-R-8 This Swagelok® reducing tubing adapter fitting has a 3/8" standard Swagelok® compression fitting on one side, and a 1/2" tubing adapter on the other. The fitting is made of 316 stainless steel. The Swagelok® side of this adapter receives a 3/8" OD tube. The 1/2" tubing end uses an outward facing nut and ferrule set which then connects to a threaded male swagelok® fitting. A 1/2" nut and ferrule set is required and must be purchased separately. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok® Tube Adapter Fitting, Reducer, 1/2 in. Swagelok® to 3/8" Tube Adapter, Stainless Steel. Swagelok® Part Number SS-810-R-6 This Swagelok® reducing tubing adapter fitting has a 1/2" standard Swagelok® compression fitting on one side, and a 3/8" tubing adapter on the other. The fitting is made of 316 stainless steel. The Swagelok® side of this adapter receives a 1/2" OD tube. The 3/8" tubing end uses an outward facing nut and ferrule set which then connects to a threaded male swagelok® fitting. A 3/8" nut and ferrule set is required and must be purchased separately. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok® Tube Adapter Fitting, Reducer, 1/2 in. Swagelok® to 1/2" Tube Adapter, Stainless Steel. Swagelok® Part Number SS-810-R-8 This Swagelok® reducing tubing adapter fitting has a 1/2" standard Swagelok® compression fitting on one side, and a 1/2" tubing adapter on the other. The fitting is made of 316 stainless steel. The Swagelok® side of this adapter receives a 1/2" OD tube. The 1/2" tubing end uses an outward facing nut and ferrule set which then connects to a threaded male swagelok® fitting. A 1/2" nut and ferrule set is required and must be purchased separately. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok® Tube Adapter Fitting, Reducer, 3/4 in. Swagelok® to 3/4" Tube Adapter, Stainless Steel. Swagelok® Part Number SS-1210-R-12 This Swagelok® reducing tubing adapter fitting has a 3/4" standard Swagelok® compression fitting on one side, and a 3/4" tubing adapter on the other. The fitting is made of 316 stainless steel. The Swagelok® side of this adapter receives a 3/4" OD tube. The 3/4" tubing end uses an outward facing nut and ferrule set which then connects to a threaded male swagelok® fitting. A 3/4" nut and ferrule set is required and must be purchased separately. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.

Swagelok® Male Pipe Weld Fitting, 1 in. Swagelok® to 1" Sch. 80 Pipe, Stainless Steel. Swagelok® Part Number: SS-1610-1-16W This Swagelok® male pipe weld fitting has a 1" standard Swagelok® compression fitting on one side (nut and ferrule set included), and a 1" (schedule 80) pipe on the other end. The pipe end has a 37.5° chamfer for ease of welding. See the second image for dimensions. These industry standard Swagelok® compression-type fittings and components are precision manufactured and offer a gas-tight, metal-on-metal seal. They are available in standard fractional tubing sizes for making up stainless steel tubing. Polished surface finishes and high purity materials virtually eliminate these fittings as a source of system contamination. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.