MKS PDR2000 Power Supply and Digital Readout Capacitance Manometer Controller. MKS Part Number: PDR2000AO. The MKS PDR2000 power supply and digital readout capacitance manometer controller provides up to 750mA to operate two Baratron pressure transducers. The MKS PDR 2000 can display one channel at a time on a 4-1/2 digital meter readout. The MKS PDR 2000 has two configurable relay set points, an RS-232 output, and a 0 to 10 VDC linear output for each transducer. Cables for the MKS PDR 2000 are available but sold separately.

MKS PDR2000AJ Power Supply and Digital Readout Capacitance Manometer Controller with Accessories. MKS Part Number: PDR2000AJ. The MKS PDR2000 power supply and digital readout capacitance manometer controller provides up to 750mA to operate two Baratron pressure transducers. The MKS PDR 2000 can display one channel at a time on a 4-1/2 digital meter readout. The MKS PDR 2000 has two configurable relay set points, an RS-232 output, and a 0 to 10 VDC linear output for each transducer. Comes with Accessories to include RS-232 Cable Connector (CBPDR-1-10) for computer communication. Fuses and Hardware. AC Power Cable: Standard IEC 320 instrument power input. (All viewed in middle image above)

IVP Cable For XGC-520 and MKS PDR2000 Controller, Dual Sensor Y Cable, DB9M to Two DB15F, Equivalent To CB2000S-1-M1. This is a dual sensor cable for the Ideal Vacuum XGC-520 Dual Capacitance Manometer Gauge Controller (P1010127) and the MKS PDR2000 (P102062). It connects the controller to up to two Baratron sensors with DB15 pinouts. This Y splitter cable has a DB9 male on one end which connects to the controller, and two DB15 female connectors on the other. This cable is manufactured by Ideal Vacuum and is a direct replacement for MKS part number CB2000S-1-M1. Ths cable is compatible with Baratron models127, 128, 626, 627, 628 or 722 series sensors with 15 pin male connectors. These cables are 10 feet long.

IVP Cable For XGC-520 and MKS PDR2000 Controller, Dual Sensor Y Cable, DB9M to Two DB9F, Replaces CB2000S-2-M1, 10 ft. This is a dual sensor cable for the Ideal Vacuum XGC-520 Dual Capacitance Manometer Gauge Controller (P1010127) and the MKS PDR2000 (P102062). It connects the controller to up to two Baratron sensors with DB9 pinouts. This Y splitter cable has a DB9 male on one end which connects to the controller, and two DB9 female connectors on the other. This cable is manufactured by Ideal Vacuum and is a direct replacement for MKS part number CB2000S-2-M1. Ths cable is compatible with Baratron 722, 750, 850, or 852 series sensors with 9 pin male connectors. These cables are 10 feet long.

MKS PDR 2000 to RS-232 Output Serial Cable 10 ft. DB15-M to DB9-F, PN: CBPDR-1-10This serial cable connects an MKS PDR 2000 capacitance diaphragm gauge controller to a remote computer. Cable is 10 ft. long. Cable is terminated one one end with a DB15-M connector, and on the other with a DB9-F.