Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 1 in. Height Tapped 1/4"-20, Anodized Aluminum, Sold 1 Each These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 1 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 1 in. Height, Vacuum Compatible. Tapped 1/4"-20, Aluminum, Sold 1 Each. These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 1 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 1.5 in. Height, Vacuum Compatible. Tapped 1/4"-20, Vacuum Compatible Aluminum, Sold 1 Each. These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 1.5 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 1.5 in. Height Tapped 1/4"-20, Anodized Aluminum, Sold 1 Each These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 1.5 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 2 in. Height. Tapped 1/4"-20, Anodized Aluminum, Sold 1 Each. These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 2 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 2 in. Height, Vacuum Compatible Tapped 1/4"-20, Vacuum Compatible Aluminum, Sold 1 Each These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 2 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 3 in. Height, Vacuum Compatible Tapped 1/4"-20, Vacuum Compatible Aluminum, Sold 1 Each. These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 3 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 3 in. Height. Tapped 1/4"-20, Anodized Aluminum, Sold 1 Each. These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 3 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 4 in. Height. Tapped 1/4"-20, Anodized Aluminum, Sold 1 Each These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 4 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 4 in. Height, Vacuum Compatible. Tapped 1/4"-20, Vacuum Compatible Aluminum, Sold 1 Each. These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 4 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 6 in. Height, Vacuum Compatible. Tapped 1/4"-20, Vacuum Compatible Aluminum, Sold 1 Each. These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 6 in. Tapped = 1/4"-20.

Post Holder with Spring-Loaded Hex-Drive Thumbscrew for 0.5 in. Diameter Posts, 1 in. Diameter, 6 in. Height. Tapped 1/4"-20, Anodized Aluminum, Sold 1 Each These post holders are designed for highly stable post mounting. They are made with anodized aluminum and utilize a thumbscrew to hold the posts in place. The thumbscrew has a spring loaded tip which, when partially depressed, holds the post in gently in place but stills allows it to be moved and rotated by hand. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The holder base is tapped with a 1/4”-20 hole on the bottom for direct attachment to an optical table or breadboard or for mounting on one of our 1/4-20" tapped pedestal posts with a set screw. Post Size = 0.5 in. Diameter = 1 in. Height = 6 in. Tapped = 1/4"-20.

Spring Loaded Hex-Locking Thumbscrew, Anodized Aluminum, 1/4-20 x 5/16 in. This anodized aluminum thumbscrew has a spring loaded tip which, when partially depressed, applies a gentle grip but still allows some movement with hand pressure. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The anodized aluminum finish prevents galling in most situations for smooth operation. These thumbscrews may be used as replacement parts compatible with Ideal Vacuum post holders for 0.5" diameter posts.

Spring Loaded Hex-Locking Thumbscrew, Vacuum Compatible Aluminum, 1/4-20 x 5/16 in. This vacuum compatible aluminum thumbscrew has a spring loaded tip which, when partially depressed, applies a gentle grip but still allows some movement with hand pressure. When the thumbscrew is fully engaged it provides a strong and secure hold. The thumbscrew can be further tightened using a 3/16" hex key (Allen wrench). The anodized aluminum finish prevents galling in most situations for smooth operation. These thumbscrews may be used as replacement parts compatible with Ideal Vacuum post holders for 0.5" diameter posts.