The Leybold Graphix Series ONE pressure controller represents the latest multipurpose pressure active sensor gauge controller. With complete coverage and control of vacuum pressures in the range between 1x10-10 to 2000 mbar or (0.75 X 10-10 to 1500 Torr) with an analog or digital interface. Depending on the model these units offer one to three channels of measurement. This Graphix ONE controller has 1 measurement channel and is able to read pressures from the following gauges, Capacitance, Piezo, Thermal conductivity, Cold Cathode Ion (Penning) and Hot Cathode Ion (Bayard-Alpert) from Leybold. These being THERMOVAC, IONIVAC, PENNINGVAC and CERAVAC as well as DU sensor gauges for the measurement of pressures above and below atmospheric pressures from Leybold Vacuum. It is also possible to use sensor gauges made by other manufacturers by entering a variable analog logarithmic or analog linear characteristic ranging from 0 – 10 Volt.

The Leybold Graphix Series TWO pressure controller represents the latest multipurpose pressure active sensor gauge controller. With complete coverage and control of vacuum pressures in the range between 1x10-10 to 2000 mbar or (0.75 X 10-10 to 1500 Torr) with an analog or digital interface. Depending on the model these units offer one to three channels of measurement. This Graphix TWO controller has 2 measurement channels and is able to read pressures from the following gauges, Capacitance, Piezo, Thermal conductivity, Cold Cathode Ion (Penning) and Hot Cathode Ion (Bayard-Alpert) from Leybold. These being THERMOVAC, IONIVAC, PENNINGVAC and CERAVAC as well as DU sensor gauges for the measurement of pressures above and below atmospheric pressures from Leybold Vacuum. It is also possible to use sensor gauges made by other manufacturers by entering a variable analog logarithmic or analog linear characteristic ranging from 0 – 10 Volt.

The Leybold Graphix Series THREE pressure controller represents the latest multipurpose pressure active sensor gauge controller. With complete coverage and control of vacuum pressures in the range between 1x10-10 to 2000 mbar or (0.75 X 10-10 to 1500 Torr) with an analog or digital interface. Depending on the model these units offer one to three channels of measurement. This Graphix THREE controller has 3 measurement channels and is able to read pressures from the following gauges, Capacitance, Piezo, Thermal conductivity, Cold Cathode Ion (Penning) and Hot Cathode Ion (Bayard-Alpert) from Leybold. These being THERMOVAC, IONIVAC, PENNINGVAC and CERAVAC as well as DU sensor gauges for the measurement of pressures above and below atmospheric pressures from Leybold Vacuum. It is also possible to use sensor gauges made by other manufacturers by entering a variable analog logarithmic or analog linear characteristic ranging from 0 – 10 Volt.

Leybold cable connects the ITR 90 BA/Pirani Sensor Gauge to TurboLab 80 vacuum pump systems and to the Leybold Graphix Pressure 123 Controllers. They are 16.5 foot long (5 meter) (this is the cable ONLY, ITR 90 BA/Pirani Sensor Gauge and TurboLab 80 vacuum pump system and Graphix Controllers sold separately.)

Leybold cable connects the ITR 90 BA/Pirani Sensor Gauge to TurboLab 80 vacuum pump systems and to the Leybold Graphix Pressure 123 Controllers. They are 10 meters long, (this is the cable ONLY, ITR 90 BA/Pirani Sensor Gauge, TurboLab 80 vacuum pump system and Graphix Controllers sold separately.)

Leybold cable connects the ITR 90 BA/Pirani Sensor Gauge to TurboLab 80 vacuum pump systems and to the Leybold Graphix Pressure 123 Controllers. They are 10 meters long, (this is the cable ONLY, ITR 90 BA/Pirani Sensor Gauge, TurboLab 80 vacuum pump system and Graphix Controllers sold separately.)

The Leybold cable type A RJ45 both sides, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 5 meters (16.5 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 10 meters (33ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 15 meters (49 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 20 meters (65 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 50 meters (164 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 30 meters (98 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.