Skip to main content
× Home Products Downloads About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login

Keyword       Ideal Spectroscopy Part Number       Manufacturer Part Number

× Molecular-Spectroscopy Optical-Table-Accessories Absorption-Spectroscopy-Gas-Cells Ultra-High Purity Gas Products Pulse-Valves-For-Jet-Cooling Vacuum-Pressure-Measurement Fittings-and-Flanges Vacuum-Valves Vacuum-Pumps Modular-Vacuum-Chambers

Condition:
  New
Part Number:
  P103873
Warranty:
  Against Product Defect
Out of Stock  



$2,101.80


Print Version

Straight Inline Molecular Sieve Trap, Inlet and Outlet NW50 KF50, Body size 8 inch OD


Straight Inline Molecular Sieve Trap, Inlet and Outlet NW50 KF50, Body size 8 inch OD


These straight inline molecular sieve traps perform a dual function. A Zeolite desiccant removes hydrocarbons which backstream toward the chamber when the mechanical pump oil is at it’s vapor pressure. Also, the Zeolite traps water vapor and other gasses before they reach the mechanical pump and contaminate the pump oil. Depending on the process, this can reduce the oil change frequency significantly. This straight Inline molecular sieve trap utilizes the two-piece trap design for ease of maintenance and Zeolite replacement. For maximum conductance the sieve material is contained in a suspended basket fabricated from perforated 304 stainless steel. This design provides conductance to the sieve at the top of the basket as well as around the periphery. A mid-basket baffle causes the gas to enter one-half of the basket and to exit the other half.

When initializing a trap, replacing the sieve or when base pressure cannot be achieved, the sieve should be regenerated by turning on the heater for a few hours and running the mechanical pump with it’s ballast valve open. The frequency and duration of sieve regeneration is dependent upon the kind and amount of gasses produced by the particular application. To replace the sieve, remove the trap end that contains the heater and remove the nut at the end of the basket. Dump the expired sieve material, replace with new, reattach the basket/end plate then perform the regeneration process outlined above. A molecular sieve charge and regeneration heater are included with every trap. The heater is held in place with a clip that allows trap mounting in any position. Standard finish is beadblasted. Replacement molecular sieve trap Zeolite Charges are available on this website.

Features:

  • Two piece clamped body design
  • Removable Zeolite media basket
  • Traps all condensable vapors
  • Stainless Steel type 304 construction, Viton O-Ring
  • Common Dimensions & Specs:
    A: 10.00"
    B: 11.30"
    C: 5.00"
    D: 8.00"
    Replacement Zeolite Charge Quantity: 4.75 lbs.
    Regeneration Heater Rating: 120V/350W
    Heater Port Outer Diameter: 2.00 inch
    Inlet & Outlet Flange Size: KF50



    Press ESC to Close


    PDF Logo IVP Technical Considerations for Selecting Vacuum Components for Chemical Processes.pdf

    PDF Logo Molsiv Adsorbents 13x 4x8 Charge Molecular Sieve Traps_89449_MSDS.pdf



    You may wish to consider the following products:

    Ideal Vacuum Logo Water Mark
    CONTACT US
    Ideal Spectroscopy
    5910 Midway Park Blvd NE,
    Albuquerque, NM 87109-5805

    Phone: (505) 872-0037
    Fax: (505) 872-9001
    info@idealspectroscopy.com



    Press ESC to Close


    deepbox image 2