Centering Ring Restrictor, Blank KF-10, ISO-KF Flange Size NW-10, Stainless Steel & Viton O-Ring These KF-10 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-10. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with Viton O-Ring. KF-10 Centering Ring Restrictor, Blank, with a Viton O-Ring ISO-KF Flange Size: NW-10

Centering Ring Restrictor, 0.5mm Orifice, ISO-KF Flange Size NW-10, Stainless Steel & Viton O-Ring These KF-10 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-10. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-10 Centering Ring Restrictor, 0.5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-10 Orifice Diameter: 0.5 mm

Centering Ring Restrictor, 1mm Orifice, ISO-KF Flange Size NW-10, Stainless Steel & Viton O-Ring These KF-10 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-10. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-10 Centering Ring Restrictor, 1mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-10 Orifice Diameter: 1 mm

Centering Ring Restrictor, 2mm Orifice, ISO-KF Flange Size NW-10, Stainless Steel & Viton O-Ring These KF-10 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-10. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-10 Centering Ring Restrictor, 2mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-10 Orifice Diameter: 2 mm

Centering Ring Restrictor, 5mm Orifice, ISO-KF Flange Size NW-10, Stainless Steel & Viton O-Ring These KF-10 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-10. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-10 Centering Ring Restrictor, 5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-10 Orifice Diameter: 5 mm

Centering Ring Restrictor, Blank KF-16, ISO-KF Flange Size NW-16, Stainless Steel & Viton O-Ring These KF-16 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-16. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with Viton O-Ring. KF-16 Centering Ring Restrictor, Blank, with a Viton O-Ring ISO-KF Flange Size: NW-16

Centering Ring Restrictor, 0.5mm Orifice, ISO-KF Flange Size NW-16, Stainless Steel & Viton O-Ring These KF-16 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-16. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-16 Centering Ring Restrictor, 0.5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-16 Orifice Diameter: 0.5 mm

Centering Ring Restrictor, 1mm Orifice, ISO-KF Flange Size NW-16, Stainless Steel & Viton O-Ring These KF-16 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-16. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-16 Centering Ring Restrictor, 1mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-16 Orifice Diameter: 1 mm

Centering Ring Restrictor, 2mm Orifice, ISO-KF Flange Size NW-16, Stainless Steel & Viton O-Ring These KF-16 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-16. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-16 Centering Ring Restrictor, 2mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-16 Orifice Diameter: 2 mm

Centering Ring Restrictor, 5mm Orifice, ISO-KF Flange Size NW-16, Stainless Steel & Viton O-Ring These KF-16 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-16. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-16 Centering Ring Restrictor, 5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-16 Orifice Diameter: 5 mm

Centering Ring Restrictor, Blank KF-25, ISO-KF Flange Size NW-25, Stainless Steel & Viton O-Ring These KF-25 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-25. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with Viton O-Ring. KF-25 Centering Ring Restrictor, Blank, with a Viton O-Ring ISO-KF Flange Size: NW-25

Centering Ring Restrictor, 0.5mm Orifice, ISO-KF Flange Size NW-25, Stainless Steel & Viton O-Ring These KF-25 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-25. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-25 Centering Ring Restrictor, 0.5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-25 Orifice Diameter: 0.5 mm

Centering Ring Restrictor, 1mm Orifice, ISO-KF Flange Size NW-25, Stainless Steel & Viton O-Ring These KF-25 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-25. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-25 Centering Ring Restrictor, 1mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-25 Orifice Diameter: 1 mm

Centering Ring Restrictor, 2mm Orifice, ISO-KF Flange Size NW-25, Stainless Steel & Viton O-Ring These KF-25 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-25. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-25 Centering Ring Restrictor, 2mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-25 Orifice Diameter: 2 mm

Centering Ring Restrictor, 5mm Orifice, ISO-KF Flange Size NW-25, Stainless Steel & Viton O-Ring These KF-25 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-25. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-25 Centering Ring Restrictor, 5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-25 Orifice Diameter: 5 mm

Centering Ring Restrictor, Blank KF-40, ISO-KF Flange Size NW-40, Stainless Steel & Viton O-Ring These KF-40 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-40. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with Viton O-Ring. KF-40 Centering Ring Restrictor, Blank, with a Viton O-Ring ISO-KF Flange Size: NW-40

Centering Ring Restrictor, 0.5mm Orifice, ISO-KF Flange Size NW-40, Stainless Steel & Viton O-Ring These KF-40 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-40. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-40 Centering Ring Restrictor, 0.5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-40 Orifice Diameter: 0.5 mm

Centering Ring Restrictor, 1mm Orifice, ISO-KF Flange Size NW-40, Stainless Steel & Viton O-Ring These KF-40 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-40. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-40 Centering Ring Restrictor, 1mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-40 Orifice Diameter: 1 mm

Centering Ring Restrictor, 2mm Orifice, ISO-KF Flange Size NW-40, Stainless Steel & Viton O-Ring These KF-40 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-40. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-40 Centering Ring Restrictor, 2mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-40 Orifice Diameter: 2 mm

Centering Ring Restrictor, 3mm Orifice, ISO-KF Flange Size NW-40, Stainless Steel & Viton O-Ring These KF-40 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-40. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-40 Centering Ring Restrictor, 3mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-40 Orifice Diameter: 3 mm

Centering Ring Restrictor, 5mm Orifice, ISO-KF Flange Size NW-40, Stainless Steel & Viton O-Ring These KF-40 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-40. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-40 Centering Ring Restrictor, 5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-40 Orifice Diameter: 5 mm

Centering Ring Restrictor, Blank KF-50, ISO-KF Flange Size NW-50, Stainless Steel & Viton O-Ring These KF-50 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-50. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with Viton O-Ring. KF-50 Centering Ring Restrictor, Blank, with a Viton O-Ring ISO-KF Flange Size: NW-50

Centering Ring Restrictor, 0.5mm Orifice, ISO-KF Flange Size NW-50, Stainless Steel & Viton O-Ring These KF-50 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-50. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-50 Centering Ring Restrictor, 0.5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-50 Orifice Diameter: 0.5 mm

Centering Ring Restrictor, 1mm Orifice, ISO-KF Flange Size NW-50, Stainless Steel & Viton O-Ring These KF-50 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-50. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-50 Centering Ring Restrictor, 1mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-50 Orifice Diameter: 1 mm

Centering Ring Restrictor, 2mm Orifice, ISO-KF Flange Size NW-50, Stainless Steel & Viton O-Ring These KF-50 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-50. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-50 Centering Ring Restrictor, 2mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-50 Orifice Diameter: 2 mm

Centering Ring Restrictor, 5mm Orifice, ISO-KF Flange Size NW-50, Stainless Steel & Viton O-Ring These KF-50 Centering Ring Restrictor vacuum fittings follow ISO-KF standards and have a flange size of NW-50. They are used to fully or partially impede the flow of vacuum, allowing for greater control of process applications. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring restrictor contains a rubber elastomer o-ring, either Buna or Viton. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. These fittings are made of corrosive resistant Stainless Steel with a Viton O-Ring. KF-50 Centering Ring Restrictor, 5mm Orifice, with Viton O-Ring ISO-KF Flange Size: NW-50 Orifice Diameter: 5 mm