Pfeiffer CMR 365 Ceramic Capacitance Diaphragm Gauge, 1/2 in. Tube, 0.1 hPa (0.1 mbar / 75 mTorr) Full Scale The Pfeiffer CMR 365 ceramic capacitance diaphragm gauge, with a 1/2 in. tube fitting, has a full-scale measuring range of 0.1 hPa (0.1 mbar / 75 mTorr) and a minimum measurable pressure of 10-5 mbar (7.5 × 10-2 mTorr). This gauge has a response time of 130 ms and an accuracy of 0.5% of the measured value. A ceramic aluminum oxide capacitive sensor element is used to measure the absolute pressure of gases, independent of gas type or composition. Lookup tables and gas conversion calculations are not required. The Pfeiffer CMR 361, 362, 363, 364, and 365 ceramic capacitance diaphragm gauges are compatible with Pfeiffer TPG 361, 362, and 366 gauge controllers and require a sensor cable, available on this website in lengths from 3 to 10 meters. Controller and sensor cable are sold separately. Operating instructions and technical data are provided below and are also available in the Downloads section.

Pfeiffer CMR 365 Ceramic Capacitance Diaphragm Gauge, KF16 Flange, 0.1 hPa (0.1 mBar/75 m Torr) Full Scale The Pfeiffer CMR 365 capacitance diaphragm gauge, with KF-16 flange, has a full scale measuring range of 0.1 hPa (0.1 mBar/75 mTorr) and a minimum measure of 10-5 mbar (7.5 x10-2 mTorr). This gauge has a response time of 130ms with an accuracy of 0.5% of the measured value. A ceramic aluminum oxide capacitive sensor element is used to measure the absolute pressure of gasses, independent of gas type or composition. Lookup tables and gas conversion calculations are not needed. Pfeiffer CMR 361, 362, 363, 364 and 365 ceramic capacitance diaphragm gauges are compatible with TPG 361, 362 and 366 Pfeiffer gauge controllers and require a sensor cable, available on this website in lengths from 3 to 10 meters. Controller and cable sold separately. Operating instructions and technical data are below and available in the downloads.

Pfeiffer CMR 365 Ceramic Capacitance Diaphragm Gauge, CF 1-1/3 (DN 16 CF-R) Flange, 0.1 hPa (0.1 mBar/75 m Torr) Full Scale The Pfeiffer CMR 365 capacitance diaphragm gauge, with CF 1-1/3 (DN 16 CF-R) flange, has a full scale measuring range of 0.1 hPa (0.1 mBar/75 mTorr) and a minimum measure of 10-5 mbar (7.5 x10-2 mTorr). This gauge has a response time of 130ms with an accuracy of 0.5% of the measured value. A ceramic aluminum oxide capacitive sensor element is used to measure the absolute pressure of gasses, independent of gas type or composition. Lookup tables and gas conversion calculations are not needed. Pfeiffer CMR 361, 362, 363, 364 and 365 ceramic capacitance diaphragm gauges are compatible with TPG 361, 362 and 366 Pfeiffer gauge controllers and require a sensor cable, available on this website in lengths from 3 to 10 meters. Controller and cable sold separately. Operating instructions and technical data are below and available in the downloads.

Pfeiffer CMR 365 Ceramic Capacitance Diaphragm Gauge, 8 VCR® Female Fitting, 0.1 hPa (0.1 mBar/75 m Torr) Full Scale The Pfeiffer CMR 365 capacitance diaphragm gauge, with Swagelok® 8 VCR® female fitting, has a full scale measuring range of 0.1 hPa (0.1 mBar/75 mTorr) and a minimum measure of 10-5 mbar (7.5 x10-2 mTorr). This gauge has a response time of 130ms with an accuracy of 0.5% of the measured value. A ceramic aluminum oxide capacitive sensor element is used to measure the absolute pressure of gasses, independent of gas type or composition. Lookup tables and gas conversion calculations are not needed. Pfeiffer CMR 361, 362, 363, 364 and 365 ceramic capacitance diaphragm gauges are compatible with TPG 361, 362 and 366 Pfeiffer gauge controllers and require a sensor cable, available on this website in lengths from 3 to 10 meters. Controller and cable sold separately. Operating instructions and technical data are below and available in the downloads. Swagelok® and VCR® are registered trademarks of Swagelok Company. Vac Goop™ is a trademark of Swagelok Company. Ideal Vacuum Products is not an authorized distributor of Swagelok Company.