Ebara Oil For EV-A Series Air Cooled Pumps, BARRIERTA J100 OIL 1kg. Part Number 927040 This is Ebara Oil For EV-A Series Air Cooled Pumps, BARRIERTA J100 OIL 1kg.

Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pump Power Cable, 1-Phase 115 VAC NEMA 5/15, 2 Meters Long, Ebara Technologies Part Number 210685 These Ebara EV-A03 and EV-A06 power cables are designed for 1-Phase 115 VAC having NEMA 5/15 to Ebara Nanaboshi NET 243-PF connector. Each of these power cables are 6 foot (2 meters) long.

Ebara Remote Controller for EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pumps. Ebara Technologies Part Number C-5150-011-7600 This is the Ebara Remote Controller for EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pumps. The Ebara remote controller is an optional accessory for the Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pumps. The remote controller connects to CN2 pump side receptacle (far right picture above).

Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pump Power Cable, 1-Phase 208-240 VAC Ebara Technologies Part Number 210687-006 These Ebara power cable cord assemblies are designed for 1-Phase 208 to 240 VAC power and fit the Ebara EV-A03-2 and EV-A06-2 model dry multi-Root's vacuum pumps. These power cables are 6 foot long (2 meters), have 14/3 conductor, and are open-ended (flying lead) design. These Ebara cables include the Nanaboshi NET 243-PF connector that attaches on the vacuum pump side and have Ebara Technologies part number 210687-006.

Ebara Power Cable AGW14 for EV-A03/A06 Dry Rotary Lobe Vacuum Pumps, 1-Phase 115VAC Ebara Technologies Part Number 210686-006 These Ebara power cable cord assemblies are designed for 1-Phase 115 VAC power and fit the Ebara EV-A03-1 and EV-A06-1 model dry multi-Root's vacuum pumps. These power cables are 6 foot long (2 meters), have 14/3 conductor, and are open-ended (flying lead) design. These Ebara cables include the Nanaboshi NET 243-PF connector that attaches on the vacuum pump side and have Ebara Technologies part number 210686-006.

Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pump Power Cable, 3-Phase 208-240 VAC, 6 Foot Long Ebara Technologies Part Number 210688-006 These Ebara power cable assemblies are 6 foot long (2 meters), 14/4 conductor, and are open-ended design for three phase models EV-A03-3 and EV-A06-3. These power cable cords are 6 foot (2 meters) long and have Ebara part number 210688-006.

Ebara EV-A10 Power Cord Cable, For 1-Phase 208 to 240 VAC Vacuum Pumps, 14/3 Conductor Ebara Part Number 914407 These Ebara EV-A10 power cables are designed for the 1-Phase 208 to 240 VAC vacuum pumps. These power cords have 14/3 conductor and are 6 Foot (2 meters) long. They have Ebara Technologies part number 914407.

Ebara EV-A10 and EV-SA20 3-Phase 208-240 VAC Power Cable Cord Assembly, 6 Foot Long Ebara Part Number 210516 These Ebara EV-A10 and EV-SA20 power cables are designed to work with the 3-Phase 208 to 240 VAC Ebara EV-A10 and EV-AS20 dry multi-Root's vacuum pumps. These power cord assemblies are 6 foot long (2 meters) with 14/4 conductor. They are open-ended for connection to 3-Phase power and fit Ebara models EV-A10-3 and EV-A20-3. They have Ebara Technologies part number 210516.

Ebara EV-A03 and EV-A06 Dry Rotary Lobe Vacuum Pump Wheel, Clear Blue, Threaded Stem with brake. Pack of 4. 2-1/2 Diameter Wheel, 3/8-16 Thread Stem, Locking Brake. These light-duty wheels fit the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps and are translucent clear blue color with 3/8-16 threaded stem and locking brake. These wheels are as a pack of 4 each.

Ebara EV-A03 Dry Rotary Lobe Vacuum Pump Caster Wheels and Height Adjusters, 4 each, Ebara Technologies Part Number C-1500-006-9000 These light-duty caster wheels and height adjusters fit the Ebara EV-A03 dry rotary lobe vacuum pumps. They come with all the nuts and washers to install. 4 each of caster wheels and height adjusters. They have Ebara part number C-1500-006-9000

Ebara EV-A06 Dry Rotary Lobe Vacuum Pump Caster Wheels and Height Adjusters, 4 each, Ebara Technologies Part Number C-1500-006-9100 These light-duty caster wheels and height adjusters fit the Ebara EV-A06 dry rotary lobe vacuum pumps. They come with all the nuts and washers to install. 4 each of caster wheels and height adjusters. They have Ebara part number C-1500-006-9100

Ebara EV-A03 Dry Rotary Lobe Vacuum Pump Solvent Vapor Trap Kit, Catch Pot For Liquids, With Drain Valve Ebara Technologies Part Number C-3080-003-3200 (FT-119) These Ebara solvent traps are designed for the EV-A03 dry rotary lobe vacuum pumps. These catch-pot traps are used to collect liquids that are present in the vacuum line and help prevent them from entering into the vacuum pump. This kit includes the solvent trap and KF-25 vacuum fittings need to install this solvent trap onto an EV-A03 pumps (see photographs above). The solvent trap includes a manual drain valve with NPT pipe thread fittings. The solvent trap has Ebara Technologies part number C-3080-003-3200 (FT-119). Specifications: KF-25 Vacuum Flanges Corrosive Resistant Stainless Steel Integrated Drain Valve KF-25 Full Nipple Union KF-25 Centering Rings and Clamps

Ebara EV-A06 Dry Rotary Lobe Vacuum Pump Solvent Vapor Trap Kit, Catch Pot For Liquids, With Sight Glass & Drain Valve Ebara Technologies Part Number C-3080-003-3100 (FT-118) These Ebara solvent traps are designed for the EV-A06 dry rotary lobe vacuum pumps. These catch-pot traps are used to collect liquids that are present in the vacuum line and help prevent them from entering into the vacuum pump. This kit includes the solvent trap and KF-40 vacuum fittings need to install this solvent trap onto an EV-A06 pumps (see photographs above). The solvent trap includes a quality sight glass for visual inspection and a manual drain valve with NPT pipe thread fittings. The solvent trap has Ebara Technologies part number C-3080-003-3100 (FT-118). Specifications: KF-40 Vacuum Flanges Corrosive Resistant Stainless Steel Solvent Level Sight Glass Integrated Drain Valve KF-40 Tee KF-40 Full Nipple Union KF-40 90 Degree Elbow KF-40 Centering Rings and Clamps

Ebara EV-A03 Air Gas Ballast Adapter, Counter Measures Against Moisture Vapor, Air Admittance Ebara Part Number C-2200-002-7010 (C22000027010) These gas ballast adapters are designed for air admittance use with the Ebara EV-A03 dry vacuum pumps. These adapters are to be used for ballast air introduction to combat moisture vapor. Air or nitrogen introduced by the gas ballast reduces the partial pressure of the pumped gases to exceed their saturation vapor pressure (keep them in the vapor phase). It is recommended to use the atmospheric air gas ballast when pumping of non-flammable condensable solvent vapors. When pumping gas vapors of flammable solvents the N2 ballast must be correctly used following the operation manual. It is effective to keep the pump running about one hour after process completion with the gas ballast valve open when pumping condensable gases like water vapor. This helps to remove all traces of water before the pump is turned off. These air gas ballast adapters for the Ebara EV-A03 pumps have Ebara part number C-2200-002-7010.

Ebara EV-A03 Nitrogen N2 Introduction Adapter, Counter Measures Against Flammable Solvent Vapors, N2 Admittance 1/4 Compression Fittings, Ebara Part Number C-2200-002-7200 (C22000027200) These gas ballast adapters are designed for nitrogen N2 admittance use with the Ebara EV-A03 dry vacuum pumps. These adapters are to be used for ballast nitrogen introduction to combat against flammable solvent vapors. Nitrogen introduced by the gas ballast reduces the partial pressure of the pumped gases to exceed their saturation vapor pressure (keep them in the vapor phase). It is recommended to use the atmospheric air gas ballast when pumping of non-flammable condensable solvent vapors. When pumping gas vapors of flammable solvents the N2 ballast must be correctly used following the operation manual. It is effective to keep the pump running about one hour after process completion with the gas ballast valve open when pumping condensable gases like water vapor. This helps to remove all traces of water before the pump is turned off. These nitrogen N2 gas ballast adapters for the Ebara EV-A03 pumps have Ebara part number C-2200-002-7200.

Ebara EV-A06 Air Gas Ballast Adapter, Counter Measures Against Moisture Vapor, Air Admittance Ebara Part Number C-2200-002-7100 (C22000027100) These gas ballast adapters are designed for air admittance use with the Ebara EV-A06 dry vacuum pumps. These adapters are to be used for ballast air introduction to combat moisture vapor. Air or nitrogen introduced by the gas ballast reduces the partial pressure of the pumped gases to exceed their saturation vapor pressure (keep them in the vapor phase). It is recommended to use the atmospheric air gas ballast when pumping of non-flammable condensable solvent vapors. When pumping gas vapors of flammable solvents the N2 ballast must be correctly used following the operation manual. It is effective to keep the pump running about one hour after process completion with the gas ballast valve open when pumping condensable gases like water vapor. This helps to remove all traces of water before the pump is turned off. These air gas ballast adapters for the Ebara EV-A06 pumps have Ebara part number C-2200-002-7100.

Ebara EV-A06 Nitrogen N2 Introduction Adapter, Counter Measures Against Flammable Solvent Vapors, N2 Admittance 1/4 Inch Compression Port, Ebara Part Number C-2200-002-7300 ( C22000027300) These gas ballast adapters are designed for nitrogen N2 admittance use with the Ebara EV-A06 dry vacuum pumps. These adapters are to be used for ballast nitrogen introduction to combat against flammable solvent vapors. Nitrogen introduced by the gas ballast reduces the partial pressure of the pumped gases to exceed their saturation vapor pressure (keep them in the vapor phase). It is recommended to use the atmospheric air gas ballast when pumping of non-flammable condensable solvent vapors. When pumping gas vapors of flammable solvents the N2 ballast must be correctly used following the operation manual. It is effective to keep the pump running about one hour after process completion with the gas ballast valve open when pumping condensable gases like water vapor. This helps to remove all traces of water before the pump is turned off. These nitrogen N2 gas ballast adapters for the Ebara EV-A06 pumps have Ebara part number C-2200-002-7300.

Ebara EV-A Star Levelers, 1.25 Diameter Pad, 3/8-16 Threads, 2.88 Inch Length., 375 Lbs max load 15 degree Swivel Stud Style Leveling Pads, Stainless Steel (Sold as 1 each) Ebara Level Star Levelers are used to mount the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps on a stationary platform. These levelers have 1.25 diameter by 3/8-16 inch threads by 2.88 inch length. Each leveler has a 375 pound max load capacity and 15 degree swivel style leveling pads. They are made of stainless steel and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps. They are sold as one each.

Ebara EV-A Star Levelers, 1.38 Diameter Pad, 3/8-16 Threads, 2.19 Inch Length, 300 Lbs max load Stud Style Leveling Pads, Stainless Steel (Sold as 1 each) Ebara Level Star Levelers are used to mount the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps on a stationary platform. These levelers have 1.38 diameter pad with by 3/8-16 inch threads by 2.19 inch length. Each leveler has a 300 pound max load capacity. They are made of stainless steel and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps. They are sold as one each.

Ebara EV-A Star Levelers, 2.00 Diameter Pad Nylon Pad, 3/8-16 Threads, 2.70 Inch Length, 300 Lbs max load Stud Style Leveling Pads, Stainless Steel (Sold as 1 each) Ebara Level Star Levelers are used to mount the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps on a stationary platform. These levelers have 2.00 diameter Nylon pad with by 3/8-16 inch threads by 2.70 inch length. Each leveler has a 300 pound max load capacity. They are made of stainless steel and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps. They are sold as one each.

Ebara EV-A Star Levelers, 2.00 Diameter Elastomer Pad, 3/8-16 Threads, 2.70 Inch Length., 300 Lbs max load Stud Style Leveling Pads, Stainless Steel (Sold as 1 each) Ebara Level Star Levelers are used to mount the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps on a stationary platform. These levelers have 2.00 diameter Elastomer pad with by 3/8-16 inch threads by 2.70 inch length. Each leveler has a 300 pound max load capacity. They are made of stainless steel and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps. They are sold as one each.

Ebara EV-A Feet, 1.56 Diameter, 3/8-16 Threads, 1.63 Inch Length, 125 Lbs Max Load, 20 lbs. Shear Load Single End Male Natural Rubber Vibration Feet, Sold as 1 each These natural rubber vibration feet are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when setting the pump on floor or level operating platform. These rubber feet have 1.56 diameter with by 3/8-16 inch threads by 1.63 inch length. Each mount is designed to support has a 125 pound max load capacity with a 20 lbs shear load rating. They are designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Ebara EV-A Mount, Double Ended, 1.56 Diameter, 3/8-16 Threads, 2.25 Inch Length, 125 Lbs Max Load, 20 lbs. Shear Load Double End Male Natural Rubber Vibration Mount, Sold as 1 each These natural rubber double ended vibration mounts are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when mounting on a stationary platform. These mounts have 1.56 diameter with by 3/8-16 inch threads by 2.25 inch length. Each mount is designed to support has a 125 pound max load capacity with a 20 lbs shear load rating. They are double ended and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Ebara EV-A Mount, Double Ended, 2.00 Diameter, 3/8-16 Threads, 2.25 Inch Length, 125 Lbs Max Load, 55 lbs. Shear Load Double End Male Natural Rubber Vibration Mount, Sold as 1 each These natural rubber double ended vibration mounts are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when mounting on a stationary platform. These mounts have 2.00 diameter with by 3/8-16 inch threads by 2.25 inch length. Each mount is designed to support has a 125 pound max load capacity with a 55 lbs shear load rating. They are double ended and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Ebara EV-A Mount, Double Ended, 2.00 Diameter, 3/8-16 Threads, 1.63 Inch Depth, 165 Lbs Max Load, 55 lbs. Shear Load Double End Female Natural Rubber Vibration Mount, Sold as 1 each These natural rubber double ended vibration mounts are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when mounting on a stationary platform. These mounts have 2.00 diameter with by 3/8-16 inch threads by 1.63 inch depth. Each mount is designed to support has a 165 pound max load capacity with a 55 lbs shear load rating. They are double ended and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.

Ebara EV-A Mount, Double Ended, 3/8-16 threads, Durometer 40, 130 Lbs Load, Vibration Mount, Style B, Neoprene Double End Mount, Sold as 1 each These natural rubber double ended vibration mounts are used with the Ebara EV-A03 and EV-A06 dry rotary lobe vacuum pumps when mounting on a stationary platform. These mounts have 3/8-16 inch threads. Each mount is designed to support has a 130 pound max load capacity with a 35 lbs shear load rating. They are double ended and designed to fit the Ebara EV-A03 and EV-A06 dry vacuum pumps and are sold as one each.