Adapter, Straight Reducer, KF-16 to CF 1-1/3 in., Flange Sizes ISO-KF NW-16 to Conflat® CFF 1.33 in., Stainless Steel. These adapters are KF-16 to CF 1-1/3 inches with flange sizes that follow ISO-KF NW-16 to Conflat® CFF 1.33 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation.Adapter KF-16 to CF 1-1/3 in., Flange Sizes ISO-KF NW-16 to Conflat® CFF 1.33 in., Stainless SteelISO-KF Flange Size: NW-16 to CF 1.33Common Dimensions:A = 1.77" (45mm)B = 0.62" (16mm)

Adapter, Conical Reducer, KF-16 to CF 2.12 in., Flange Sizes ISO-KF NW-16 to Conflat® CFF 2-1/8 in., Stainless Steel These concical adapters are KF-16 to CF 2-1/8 inches with flange sizes that follow ISO-KF NW-16 to Conflat® CFF 2.12 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter Conical KF-16 to CF 2.12 in., Flange Sizes ISO-KF NW-16 to Conflat® CFF 2-1/8 in., Stainless Steel ISO-KF Flange Size: NW-16 to CF 2.12 Common Dimensions: A = 1-11/16 (43mm), B = 0.7/8 (22mm)

Adapter KF-16 to CF 2-3/4 in., Flange Sizes ISO-KF NW-16 to Conflat® CFF 2.75 in., Stainless Steel These adapters are KF-16 to CF 2-3/4 inches with flange sizes that follow ISO-KF NW-16 to Conflat® CFF 2.75 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-16 to CF 2-3/4 in., Flange Sizes ISO-KF NW-16 to Conflat® CFF 2.75 in., Stainless Steel ISO-KF Flange Size: NW-16 to CF 2.75 Common Dimensions: A = 2.08 (53mm), B = 0.62 (16mm)

Adapter Conical KF-16 to CF 2-3/4 in., Flange Sizes ISO-KF NW-16 to Conflat® CFF 2.75 in., Stainless Steel These conical adapters are KF-16 to CF 2-3/4 inches with flange sizes that follow ISO-KF NW-16 to Conflat® CFF 2.75 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter Conical KF-16 to CF 2-3/4 in., Flange Sizes ISO-KF NW-16 to Conflat® CFF 2.75 in., Stainless Steel ISO-KF Flange Size: NW-16 to CF 2.75 Common Dimensions: A = 2-3/4 (70mm), B = 0.62 (16mm)

Adapter, Conical Reducer, KF-25 to CF 1-1/3 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 1.33 in., Stainless Steel These conical adapters are KF-25 to CF 1-1/3 inches with flange sizes that follow ISO-KF NW-25 to Conflat® CFF 1.33 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-25 to CF 1-1/3 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 1.33 in., Stainless Steel ISO-KF Flange Size: NW-25 to CF 1.33 Common Dimensions: A = 1-11/16 (43mm), B = 7/8 (22mm)

Adapter, Straight Reducer, KF-25 to CF 2.12 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 2.12 in., Stainless Steel These adapters are KF-25 to CF 2.12 inches with flange sizes that follow ISO-KF NW-25 to Conflat® CFF 2.12 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-25 to CF 2.12 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 2.12 in., Stainless Steel ISO-KF Flange Size: NW-25 to CF 2.12 Common Dimensions: A = 1-13/16 inch (46mm), B = 15/16 inch (24mm)

Adapter, Straight Reducer, KF-25 to CF 2-3/4 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 2.75 in., Stainless Steel These adapters are KF-25 to CF 2-3/4 inches with flange sizes that follow ISO-KF NW-25 to Conflat® CFF 2.75 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-25 to CF 2-3/4 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 2.75 in., Stainless Steel ISO-KF Flange Size: NW-25 to CF 2.75 Common Dimensions: A = 1.78 (45mm), B = 0.87 (22mm)

Adapter, Conical Reducer, KF-25 to CF 2-3/4 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 2.75 in., Stainless Steel These conical adapters are KF-25 to CF 2-3/4 inches with flange sizes that follow ISO-KF NW-25 to Conflat® CFF 2.75 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter Conical KF-25 to CF 2-3/4 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 2.75 in., Stainless Steel ISO-KF Flange Size: NW-25 to CF 2.75 Common Dimensions: A = 2-3/4 (69mm), B = 7/8 (22mm)

Adapter, Conical Reducer, KF-25 to CF 3.38 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 3.38 in., Stainless Steel These conical adapters are KF-25 to CF 3.38 inches with flange sizes that follow ISO-KF NW-25 to Conflat® CFF 3.38 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-25 to CF 3.38 in., Flange Sizes ISO-KF NW-25 to Conflat® CFF 3.38 in., Stainless Steel ISO-KF Flange Size: NW-25 to CF 3.38 Common Dimensions: A = 2-3/4 inch (70mm), B = 1-3/8 inch (35mm)

Adapter, Conical Reducer, KF-40 to CF 1-1/3 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 1.33 in., Stainless Steel These conical adapters are KF-40 to CF 1-1/3 inches with flange sizes that follow ISO-KF NW-40 to Conflat® CFF 1.33 in. standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter conical KF-40 to CF 1-1/3 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 1.33 in., Stainless Steel ISO-KF Flange Size: NW-40 to CF 1-1/3 Common Dimensions: A = 2-1/2 inch (69mm), B = 1-3/8 inch (35mm)

Adapter KF-40 to CF 2-3/4 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 2.75 in., Stainless Steel These adapters are KF-40 to CF 2-3/4 inches with flange sizes that follow ISO-KF NW-40 to Conflat® CFF 2.75 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Div> Adapter KF-40 to CF 2-3/4 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 2.75 in., Stainless Steel ISO-KF Flange Size: NW-40 to CF 2.75 Common Dimensions: A = 1.78 (45mm), B = 1.33 (34mm)

Adapter, Straight Reducer, KF-40 to CF 3.38 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 3.38 in., Stainless Steel These adapters are KF-40 to CF 3.38 inches with flange sizes that follow ISO-KF NW-40 to Conflat® CFF 3.38 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-40 to CF 3.38 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 3.38 in., Stainless Steel ISO-KF Flange Size: NW-40 to CF 3.38 Common Dimensions: A = 1-13/16 inch (46mm), B = 1-3/8 inch (35mm)

Adapter, Conical Reducer, KF-40 to CF 4-1/2 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 4.50 in., Stainless Steel These conical adapters are KF-40 to CF 4-1/2 inches with flange sizes that follow ISO-KF NW-40 to Conflat® CFF 4.50 in. standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter conical KF-40 to CF 4-1/2 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 4.50 in., Stainless Steel ISO-KF Flange Size: NW-40 to CF 4.50 Common Dimensions: A = 2-15/16 inch (74mm), B = 1-3/8 inch (35mm)

Adapter, Straight Reducer, KF-50 to CF 1.33 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 1-1/3 in., Stainless Steel These adapters are KF-50 to CF 1.33 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 1-1/3 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-50 to CF 1.33 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 1-1/3 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 1.33 Common Dimensions: A = 2 inch (50mm), B = 1-1/16 inch (27mm)

Adapter KF-50 to CF 2-3/4 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 2.75 in., Stainless Steel These adapters are KF-50 to CF 2-3/4 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 2.75 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-50 to CF 2-3/4 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 2.75 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 2.75 Common Dimensions: A = 1.78 (45mm), B = 1.3 (34mm)

Adapter, Conical Reducer, KF-50 to CF 2.75 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 2-3/4 in., Stainless Steel These concical adapters are KF-50 to CF 2-3/4 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 2.75 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter Conical KF-50 to CF 2.75 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 2-3/4 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 2.75 Common Dimensions: A = 2-11/16 (68mm), B = 1-3/8 (35mm)

Adapter, Straight Reducer, KF-50 to CF 3.38 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 3.38 in., Stainless Steel These adapters are KF-50 to CF 3.38 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 3.38 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-50 to CF 3.38 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 3.38 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 3.38 Common Dimensions: A = 1-13/16 inch (45mm) B = 1-3/8 inch (35mm)

Adapter KF-50 to CF 4-1/2 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 4.50 in., Stainless Steel These adapters are KF-50 to CF 4-1/2 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 4.5 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-50 to CF 4-1/2 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 4.50 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 4.50 Common Dimensions: A = 1.95 (50mm), B = 1.83 (46mm)

Adapter, Conical Reducer, KF-50 to CF 4.5 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 4-1/2 in., Stainless Steel These concical adapters are KF-50 to CF 4-1/2 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 4.50 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter Conical KF-50 to CF 4.50 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 4-1/2 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 4.50 Common Dimensions: A = 2-15/16 (74mm), B = 1-3/8 (35mm)

Adapter, Conical Reducer, KF-50 to CF 6.00 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 6.00 in., Stainless Steel These concical adapters are KF-50 to CF 6.00 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 6.00 inch standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter Conical KF-50 to CF 6.00 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 6.00 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 6.00 Common Dimensions: A = 4-1/4 (107mm), B = 1-3/8 (35mm)

Adapter KF-50 to CF 8 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 8.00 in., Stainless Steel These adapters are KF-50 to CF 4-1/2 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 8.00 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges. The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter KF-50 to CF 4-1/2 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 8.00 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 8.00 Common Dimensions: A = 1.95 (50mm) B = 1.83 (46mm)

Adapter, Conical Reducer, KF-40 to CF 2-1/8 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 2.12 in., Stainless Steel These conical adapters are KF-40 to CF 2-1/8 inches with flange sizes that follow ISO-KF NW-40 to Conflat® CFF 2.12 in. standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter conical KF-40 to CF 2-1/8 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 2.12 in., Stainless Steel ISO-KF Flange Size: NW-40 to CF 2-1/8 Common Dimensions: A = 2-1/2 inch (69mm), B = 1-3/8 inch (35mm)

Adapter, Conical Reducer, KF-40 to CF 3.38 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 3.38 in., Stainless Steel These conical adapters are KF-40 to CF 3.38 inches with flange sizes that follow ISO-KF NW-40 to Conflat® CFF 3.38 in. standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter conical KF-40 to CF 3.38 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 3.38 in., Stainless Steel ISO-KF Flange Size: NW-40 to CF 3.38 Common Dimensions: A = 2-1/2 inch (69mm), B = 1-3/8 inch (35mm)

Adapter, Conical Reducer, KF-40 to CF 4-5/8 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 4.62 in., Stainless Steel These conical adapters are KF-40 to CF 4-5/8 inches with flange sizes that follow ISO-KF NW-40 to Conflat® CFF 4.62 in. standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter conical KF-40 to CF 4-5/8 in., Flange Sizes ISO-KF NW-40 to Conflat® CFF 4.62 in., Stainless Steel ISO-KF Flange Size: NW-40 to CF 4.62 Common Dimensions: A = 4-1/16 inch (103mm), B = 1-3/8 inch (35mm)

Adapter, Conical Reducer, KF-50 to CF 2.12 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 2-1/8 in., Stainless Steel These concical adapters are KF-50 to CF 2-1/8 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 2.12 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter Conical KF-50 to CF 2.12 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 2-1/8 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 2.12 Common Dimensions: A = 2-11/16 (68mm), B = 1-3/8 (35mm)

Adapter, Conical Reducer, KF-50 to CF 4.62 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 4-5/8 in., Stainless Steel These concical adapters are KF-50 to CF 4-5/8 inches with flange sizes that follow ISO-KF NW-50 to Conflat® CFF 4.62 standards. They are commonly used to make connections between ISO-KF and Conflat® vacuum fittings. The ISO-KF flanges are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel. Conflat® is a registered trademark of Varian Corporation. Adapter Conical KF-50 to CF 4.62 in., Flange Sizes ISO-KF NW-50 to Conflat® CFF 4-5/8 in., Stainless Steel ISO-KF Flange Size: NW-50 to CF 4.62 Common Dimensions: A = 4-1/16 (103mm), B = 1-3/8 (35mm)