SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 1.33 to I.D. 1/2 in., Stainless Steel This adapter converts a CF 1.33 flanged fitting to a I.D. 1/2 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 1.33 in.2 = 1/2 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 2.125 to I.D. 1/2 in., Stainless Steel This adapter converts a CF 2.125 flanged fitting to a I.D. 1/2 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 2.125 in.2 = 1/2 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 2.125 to I.D. 5/8 in., Stainless Steel This adapter converts a CF 2.125 flanged fitting to a I.D. 5/8 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 2.125 in.2 = 5/8 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 2.75 to I.D. 1/2 in., Stainless Steel This adapter converts a CF 2.75 flanged fitting to a I.D. 1/2 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 2.75 in.2 = 1/2 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 2.75 to I.D. 5/8 in., Stainless Steel This adapter converts a CF 2.75 flanged fitting to a I.D. 5/8 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 2.75 in.2 = 5/8 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 2.75 to I.D. 3/4 in., Stainless Steel This adapter converts a CF 2.75 flanged fitting to a I.D. 3/4 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 2.75 in.2 = 3/4 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 2.75 to I.D. 1 in., Stainless Steel This adapter converts a CF 2.75 flanged fitting to a I.D. 1 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 2.75 in.2 = 1 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 2.75 to I.D. 1 1/8 in., Stainless Steel This adapter converts a CF 2.75 flanged fitting to a I.D. 1 1/8 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 2.75 in.2 = 1 1/8 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 2.75 to I.D. 1 1/4 in., Stainless Steel This adapter converts a CF 2.75 flanged fitting to a I.D. 1 1/4 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 2.75 in.2 = 1 1/4 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D.1/2 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 1/2 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 1/2 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D. 5/8 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 5/8 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 5/8 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D. 3/4 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 3/4 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 3/4 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D. 1 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 1 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 1 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D. 1 1/8 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 1 1/8 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 1 1/8 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D. 1 1/4 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 1 1/4 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 1 1/4 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D. 1 3/8 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 1 3/8 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 1 3/8 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D. 1 1/2 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 1 1/2 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 1 1/2 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 3.375 to I.D. 1 3/4 in., Stainless Steel This adapter converts a CF 3.375 flanged fitting to a I.D. 1 3/4 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 3.375 in.2 = 1 3/4 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

SWIFT-SEAL: CF Conflat to Compression Port Adapter, CF 4.5 to I.D. 2 in., Stainless Steel This adapter converts a CF 4.5 flanged fitting to a I.D. 2 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" CF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = CF 4.5 in.2 = 2 in. 3 = 0.7 in. (18 mm)4 = 1.00 in. (25.6 mm)5 = 1.2 in. (31 mm)

Replacement Viton O-Ring for Swift-Seal 1/2in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50 These replacement O-rings are made to fit 0.50 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P103919), KF-25 (P103773), KF-40 (P103774), and KF-50 (P103778).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 1/2 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 5/8 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50 These replacement O-rings are made to fit 0.625 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P1010080), KF-25 (P103771), KF-40 (P1010081), and KF-50 (P1010082).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 5/8 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50 These replacement O-rings are made to fit 0.75 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P103920), KF-25 (P103770), and KF-50 (P103779).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50

Replacement Viton O-Ring for Swift-Seal 1.0 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50 These replacement O-rings are made to fit 1.0 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-25 (P103772), KF-40 (P103776), and KF-50 (P103780).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1.0 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 1/8 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50 These replacement O-rings are made to fit 1.125 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-25 (P103769), KF-40 (P103777), and KF-50 (P103781).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 1 1/8 in. ID Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 1/4 in. Diameter Series Compression Port Adapters- KF-40, KF-50 These replacement O-rings are made to fit 1.25 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-40 (P103922), and KF-50 (P1010083).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 1/4 in. ID Diameter Series Compression Port Adapters- KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 1/2 in. Diameter Series Compression Port Adapters- KF-40, KF-50 These replacement O-rings are made to fit 1.500 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-40 (P103921), and KF-50 (P103782).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 1/2 in. Inner Diameter Series Compression Port Adapters- KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 3/4 in. Diameter Series Compression Port Adapters- KF-50 These replacement O-rings are made to fit 1.75 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-50 (P1010085).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 3/4 in. ID Diameter Series Compression Port Adapters- KF-50

Replacement Viton O-Ring for Swift-Seal 2.0 in. Diameter Series Compression Port Adapters- KF-50 These replacement O-rings are made to fit 2.0 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-50 (P103783).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 2.0 in. Inner Diameter Series Compression Port Adapters- KF-50