Agilent Varian Turbo-V 1001 Rack-Mount Controller For Turbo-V 1001 Turbo Pumps. Agilent Varian Part Number PN: X3501-64003. The Agilent Varian Turbo-V 1001 rack-mount controllers can power the Turbo-V 1001 turbo molecular pumps, its cooling fan, and its vent valve. These Agilent Varian TV1001 rack-mount turbo pump controllers can operate on 100, 120, 220, or 240 volts AC input power. A manually operated input voltage selector is integrated into the rack mount controller power supply input (see photo below). A flat-head screwdriver can be used to pop out the voltage selector box, rotate the voltage selector to the desired input voltage, and re-insert. The Agilent Varian TV1001 rack-mount turbo pump controllers also incorporate auxiliary power connectors (1 Amp max output) for powering the cooling fan and vent valve devices. These auxiliary connectors are located in the upper right-hand corner on back side of controller (see figure below). Warning, these auxiliary power connectors are not to be used to power the roughing pump, 1 Amp maximum output! The turbo pump to controller cable is integral being built into the Turbo-V 1001 rack-mount controller and is standard 10 foot length. A P1 connector on the back side of the rack-mount controller handles interlock an other logic (see photo below). A P1 interlock-jumped connector is provided with each new Turbo-V 1001 rack-mount controller and this connector must be in place to by-pass the interlock and allow the pump to start after installation.All optional accessories, pumps, controllers, and different configurations are available from us at Ideal Vacuum. The user’s manual and Agilent Varian Turbo-V 1001 rack-mount controller catalog brochure sections are available for download in PDF format below.

Agilent Varian TwisTorr 804 FS Turbomolecular Vacuum Pump, Conflat CF 10 Inch Inlet Flange, 720 L/S Pumping Speed Cooling Kit Required, Agilent Varian Part Number X3511-64027. These Agilent Varian TwisTorr 804 FS turbomolecular vacuum pumps have a Conflat CF 10 inch inlet flange and have the Agilent Floating Suspension with patented TwisTorr drag stages. These Agilent Varian TwisTorr 804 FS turbomolecular high-vacuum pumps have new and improved performance, including a newly designed labyrinth Twistorr drag stage technology and the Agilent Floating Suspension (AFS) along with optimized thermal design mapping. TwisTorr drag stages create high compression ratios for light gases such as Hydrogen and Helium to deliver high throughput and high tolerance of foreline pressure, thereby permitting the use of smaller and more economical backing pumps. The Agilent Varian TwisTorr 804 FS turbo pumps, with conflat intake, are true ultra-high vacuum (UHV) pumps having an ultimate pressure as low as 1x10-10 Torr when used correctly, for example, the Conflat versions of these pumps allow the intake flange to be baked up to 120 degrees Celsius. The required fan air cooling kit is sold separately.This technology results in a compact rotor design that is energy-efficient and maintains a low operating temperature. The Agilent Floating Suspension System (AFS) reduces noise and vibration, and ensures optimal bearing operating conditions to extend operating life, minimize system downtime, and assure stable pumping performance over long periods of time. The unique ceramic ball bearings with permanent lubrication eliminate oil and maintenance, and permit operation of the pump in any orientation. These TwisTorr 804 FS turbo pumps require a cooling kit, either fan forced-air or water cooling, along with an outboard remote rack-mount or onboard pump-side-mounted controller, all are sold separately by Ideal Vacuum.Agilent turbo pumps are designed for optimum performance in real world applications and include integration of pumping systems and multi-flow pumps. Compact sized pumps meet the needs of industries with stringent space requirements. These new Agilent TwisTorr 804 FS turbo pumps require minimal to no maintenance and provide protection from misuse. These pumps go through a variety of quality and reliability tests to include: Long life, Shock, Vibration, Packaging, Thermal, and Noise. The Agilent Varian TwistTorr 804 FS turbo pump with a Conflat CF 10 inch inlet flange has a pumping speed of 720 l/s of nitrogen, KF-25 (and spare KF-40 interchangable) foreline flange and ambient operating temperature from 5 °C to +35 °C. These 804 FS pumps have a start up time of 3 minutes, Rotational speed up to 49,500 rpm. Recommend foreline pumps are dry IDP-10, IDP-15 or wet DS-302. The cooling requirements are a minimum of forced air when conditions are 5 to 35 °C ambient air temperature or water cooling with water temperature between 15 to 25 °C at a 100 l/h and water pressure max of 75 psi. The new Agilent Twistorr 804 FS offers a blend of performance and features that is suited for a wide range of applications. It is a very versatile turbo and can be used in a variety of fields: Typical Turbo Pump Applications include: Mass Spectrometry Gas Chromatography Mass Spectrometry (GC/MS) Liquid Chromatography Mass Spectrometry (LC/MS) Inductively Coupled Plasma Mass Spectrometry (ICP-MS) Time-of-Flight Mass Spectrometry (TOF) Vacuum in Research and Development: High Energy Physics Fusion Technology General UHV Research Synchrotron Light Sources Particle Accelerators Nanotechnology Instruments: Electron Microscopy Scanning Electron Microscopy (SEM) Transmission Electron Microscopy (TEM) Focused Ion-beam Systems (FIB) Surface Analysis Semiconductor Manufacturing Industrial Vacuum Processing: Thin Film Deposition Glass coating equipment (architectural and automotive glass, flat panel displays) Thin film solar cells production (photo-voltaic) Optical data media (CD, DVD, Magneto Optical Discs) Magnetic storage media Surface treatments Optical coating (ophthalmic, precision opto-electronics) Roll/Web coating on films or foils Device Processing: TV & Monitor picture tube manufacture Evacuation of lamps (motorway lighting, beamers) X-Ray tubes & electron devices General Processes: Vacuum Furnaces Metallurgy

This Agilent Varian Turbo-V84-AG Navigator Controller is a single-state controlled frequency converter with the following features. Drives the pumps of the TwisTorr 84 FS Family. Powers the pump cooling fan. Drives the vent valve Provides and acquires the pressure of the wide range gauges. Remote I/O compatible with the previous verson. Navigator default serial compatible RS 232 and 485 interface Able to operate with Active Gauges See chart below: This 84FS AG Navigator Controller supports the following Agilent Active Pressure Gauges: FRG 700/702, FRG 720/730 IM 500, IMG 500 PVG 500/502 PCG 750/752 CDG 500 T1000, CDG 500 T0100 CDG 500 T0010, CDG 500 T0001 These Varian Agilent TwisTorr 84 FS Navigator controllers are driven by a single chip microcomputer and consist of two PCBs which include power supply and 3-phase output, analog and I/O section, microprocessor and digital section. The power supply, together with the 3-phase output converts the single phase AC mains supply or 24Vdc supply into a 3-phase low voltage, medium frequency output which is required to power the pump. These controllers have a serial port RS-232/485 which allows the pump to be interfaced with the system controls and to be operated via PC with T-Plus Software. (software sold separately) on this website. These Varian Agilent TwisTorr 84 FS Navigator controllers are Brand New and come with manufacture warranty. For complete specifications, controller functions, and instruction manual please see the available PDF download below.

Agilent Varian TwisTorr 305 FS Turbomolecular Vacuum Pump To Controller Extension Cable, 5 Meters. Agilent Varian Part Number: 9699942M007. These Agilent Varian TwisTorr 305 FS turbomolecular vacuum pump to rack mount controller extension cables are used to extend the distance the pump and its electronics. This turbo extension cable is 5 meters and has Agilent Varian Part Number: 9699942M007.

Agilent Varian Turbo Inlet Screen, Conflat CF 2.75, Stainless Steel, Fits Most Compact Turbo Pumps With Conflat CF 2.75 Inch Inlet. Agilent Varian Part No. 9699328. These Agilent Varian inlet screens are designed to protect the TwisTorr 74 FS and 84 FS turbo molecular vacuum pumps with Conflat CF 2.75 Inch intake flanges. These turbo intake splitter sheilds help protect the pump from foreign objects, they are made of stainless steel, and have Agilent Varian part number is 969-9328. Inlet Screen fits most compact turbo pumps with Conflat CF 2.75 Inch inlet flange, including Agilent Varian models:TwisTorr 74 FS TwisTorr 84 FS

Fan Air Cooling Kit for Agilent TwisTorr 305 FS Turbomolecular Pumps With Rack Mount Controller. PN: X3500-68011. This is an air fan cooling kit for Agilent TwisTorr 305 FS turbomolecular vacuum pumps. It mounts to the base of the pump, and provides radial cooling to the pump. The fan cable plugs into the J6 FAN connector on the back of the rack mounted X3500-68011 turbo pump controller. This fan air cooling kit has an attached 2 ft. long cable and includes all necessary mounting hardware. This is a direct replacement for the Agilent X3501-68011 fan air cooling kit. A 5 meter fan extention cable, part number P10553 (Agilent PN: 89699940) is also available. This fan kit is not compatible with Agilent Onboard Navigator Turbo Pump Controllers. We offer fan cooling kits for onboard controllers, as well as the complete line of Agilent Turbo pumps and accessories in other listings. Please see the downloads for more information about TwisTorr turbo pumps and controllers. Compatible with the Agilent TwisTorr 305 FSTurbomolecular Pump. Compatible with the Agilent X3506-64130 Rack Mount Turbomolecular Pump Controller. For installation instructions please see the downloads.

Agilent Varian Fan Air Cooling Kit For TwisTorr 305-IC (with Internal Controller) Turbomolecular Pumps. Agilent Vacuum Part Number PN: X3500-68010This Agilent Varian 305-IC (with Integrated Controller) fan air cooling kit can be powered directly by 24V DC or using the fan output from the integrated controller. This Fan Kit when powered by 305-IC turbo’s integrated controller must also be used with an adapter kit Agilent PN (X3514-68001, see middle graphic to the side) that connects on to the integrated controller on the 305-IC turbo pump. For fan install instructions see pages 250-254 in the Agilent 305-IC TwisTorr turbomolecular user manual in pdf format below.

Air Cooling Fan Extension Cable for Agilent Varian TwisTorr 305-IC (Integrated Controller), 5 Meters. These fan extension cables are used with Agilent Varian TwisTorr 305-IC (Integrated Controller) turbo pumps. The TwisTorr 305 FS is a compact, reliable, energy efficient 300 l/s turbo drag pump with innovative breakthrough technologies that have lead to outstanding performace. They are designed for reliability and feature the new Agilent floating suspension. This ensures that the turbo has low vibration, low acoustical noise, optimal working conditions for the bearings with extended operating life and exceptional stability for demanding SEM applications. The base pressure for the TwisTorr 305 FS is as low as 1x10-10 Torr when backed with the recommended roughing pump. The turbo has a KF-16 roughing flange and an option to replace with the KF-25 roughing flange (pn: X3513-68000). Please see the available instruction manuals in our PDF download section Below.

Custom Extended Length Outlet for Agilent Twisttorr 84 Turbo, 6061 Aluminum AlloyFitting Size NW KF-16 This is an extended length exhaust outlet for Agilent Twisttorr 84 FS turbomolecular pumps. The extended length provides extra clearance, easing access to rouging pump connections. The outlet connection is NW KF-16. Agilent Twisttorr 84 FS Extended Length exhaust outlet. Outlet Length: 1.5"Outlet Connection: NW KF-16

Agilent Varian Inlet Screen DN63 for Varian Turbo-V 81-M Vacuum Pumps PN 9699300 This an Agilent Varian Inlet Screen DN63 for Varian Turbo-V 81-M ISO.Varian V81M ISO-63 Inlet Screen:For Agilent Varian Turbo Vacuum Pumps - Fits The Following Agilant Varian Vacuum Pumps: Varian Turbo-V 81-M series ISO (sold as 1 each)Material: stainless steelVarian Part Number: 9699300

Agilent Varian Turbo Pump Inlet Screen, For Large TwisTorr and Turbo-V Pumps With ISO-200 or Conflat CF 10 Inch Inlet Flange. Agilent Varian Part Number PN: 969-9316. These Agilent Varian inlet screens are designed to protect the large TwisTorr FS and Turbo-V turbo molecular vacuum pumps with ISO-200 or CF 10 inch intake flanges. The inlet screen (splinter guard) is a small accessory that is often overlooked but a very important part of a vacuum system. It is used to protect the turbo from small objects or debris that may fall or be sucked into the rotor. These turbo intake splinter shields help protect the pump from foreign objects and have Agilent Varian part number is 9699316.Works With Agilent TwisTorr and Turbo-V Turbo Pump Models: TwisTorr 804 FS Turbo-V 1001

Fan Air Cooling Kit for Agilent Large TwisTorr and Turbo-V Turbomolecular Pumps with Remote Rack Mount Controller, X3501-68016, X3501-64003. This is an air fan cooling kit for Agilent TwisTorr FS 404, 704, 804 and Turbo-V 1001 turbomolecular vacuum pumps. It mounts to the base of the pump, and provides radial cooling to the pump. It connects to the round J3 FAN connector on the back of rack mounted X3501-68016 or X3501-64003 turbo pump controllers. This fan air cooling kit has an attached 20 ft. long cable and includes all necessary mounting hardware. This is a direct replacement for the Agilent X3501-68001 fan air cooling kit. Compatible with these Agilent Turbomolecular Pump Models: TwisTorr 404 FS TwisTorr 704 FS TwisTorr 804 FS Turbo-V 1001 Compatible with these Rack Mount Agilent Turbomolecular Pump Controller Models: X3501-68016 X3501-64003 This fan kit is not compatible with Agilent Onboard Navigator Turbo Pump Controllers. We offer fan cooling kits for onboard controllers, as well as the complete line of Agilent Turbo pumps and accessories in other listings. Please see the downloads for more information about pumps and controllers.

Agilent Varian Fan Air Cooling Kit For Large TwisTorr and Turbo-V Turbomolecular Pumps With Local Navigator Controller. Agilent Varian Part Number PN: 9699297. These Agilent Varian TwistTorr and Turbo-V air cooling fan kits are designed to work with the local Navigator (bottom or side pump mounted) controllers and have Agilent Varian part number 9699297. These kits include the air cooling fan, power cable to connect the cooling fan to 24 VDC supply on the Navigator controller through a P4 connector, and bottom of pump mounting style bracketing. This is very important when ordering, there are two different air cooling fan kits for the Agilent Varian large TwistTorr and Turbo-V turbo molecular pumps: one is designed to work with the remote Rack-Mount controller where the cooling fan operates on 115 VAC. The other which is being sold here, is designed to work with the bottom or side mounted local Naviagator controller operating on 24VDC (see middle graphic to the side) . Works With Agilent TwisTorr Navigator Controller Powered Turbo Pump Models: TwisTorr 404 FS TwisTorr 704 FS TwisTorr 804 FS Turbo-V 1001

Agilent Varian Turbo Inlet Screen, Conflat CF 4.5 Inch, Stainless Steel, Fits Most Compact Turbo Pumps With CF 4.5 Inch Inlet. Agilent Varian Part Number PN: X3502-68000. These Agilent Varian inlet screens are designed to protect the TwisTorr 74 FS and 84 FS turbo molecular vacuum pumps with Conflat CF 4.5 Inch intake flanges. These turbo intake splitter sheilds help protect the pump from foreign objects, they are made of stainless steel, and have Agilent Varian part number is X3502-68000. Inlet Screen fits most compact turbo pumps with Conflat CF 4.5 Inch inlet flange, including Agilent Varian models:TwisTorr 74 FS TwisTorr 84 FS

Ideal Vacuum Turbo Pump Fan Air Cooling Kit for Agilent Varian TwisTorr 74-FS, 84-FS, and Turbo-V 81, Meets or exceeds OEM specifications for Agilent Varian Cooling Fan, Part Number 9699290. These Ideal Vacuum radial air fan cooling kits fit all Agilent Varian Twistorr 74FS, 84FS, and Turbo-V 81 turbomolecular vacuum pumps, and provide air flow perpendicular to the pump. These kits are a direct replacement for Agilent Varian cooling fan part number: 9699290. The fan is mounted to an L-shaped bracket which mounts to the bottom of the pump with eight included M3 screws. The fan can be conveniently oriented in multiple positions. The fan has a 50 cm cable with a USB-B male connector which connects to and is powered by the on-board or rack mounted turbo controller. When used with an on-board controller, the fan bracket is sandwiched between the pump and controller. On-board controllers include an adapter plate and all necessary mounting hardware. This air cooling fan kit fits these Agilent Varian turbo pumps: TwisTorr 74-FS TwisTorr 84-FS Turbo-V 81 and these controllers: 74FS Navigator AG ¼ Rack Controller 74FS Navigator On-Board Controller 84FS Navigator AG ¼ Rack Controller 84FS Navigator On-Board Controller Turbo-V 81 AG Rack Controller Please download and read the pump’s instruction manual for more detailed installation information.