Optical Breadboard 4 x 6 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 4 x 6 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Five counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Four holes are inset 1 inch from each corner, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 4 in. Length: 6 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Five for 1/4 in. socket head cap screws Counterbore Locations: 1 in. inset from each corner and one in the center Flatness: 0.006 in. over 1 ft2

Optical Breadboard 6 x 6 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 6 x 6 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Five counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Four holes are inset 1 inch from each corner, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 6 in. Length: 6 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Five for 1/4 in. socket head cap screws Counterbore Locations: 1 in. inset from each corner and one in the center Flatness: 0.006 in. over 1 ft2

Optical Breadboard 8 x 8 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 8 x 8 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Five counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Four holes are inset 1 inch from each corner, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 8 in. Length: 8 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Five for 1/4 in. socket head cap screws Counterbore Locations: 1 in. inset from each corner and one in the center Flatness: 0.006 in. over 1 ft2

Optical Breadboard 8 x 10 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 8 x 10 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Five counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Four holes are inset 1 inch from each corner, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 8 in. Length: 10 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Five for 1/4 in. socket head cap screws Counterbore Locations: 1 in. inset from each corner and one in the center Flatness: 0.006 in. over 1 ft2

Optical Breadboard 12 x 12 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 12 x 12 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Five counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Four holes are inset 1 inch from each corner, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 12 in. Length: 12 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Five for 1/4 in. socket head cap screws Counterbore Locations: 1 in. inset from each corner and one in the center Flatness: 0.006 in. over 1 ft2

Optical Breadboard 12 x 18 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 12 x 18 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Five counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Four holes are inset 1 inch from each corner, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 12 in. Length: 18 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Five for 1/4 in. socket head cap screws Counterbore Locations: 1 in. inset from each corner and one in the center Flatness: 0.006 in. over 1 ft2

Ideal Spectroscopy Optical Breadboard to 6x6 or 9x9 Vacuum Cube 4 in. Long Adapter Rail, 6061-T6 AluminumThese optical breadboard to vacuum cube adapter rails allow optical breadboards to be mounted directly to the exterior of a 6x6 or 9x9 vacuum cube plate. This provides a convenient way to add optical accessories and create custom experimental setups around a vacuum cube. The adapter rail positions the external optical breadboard surface to be coincident with the interior optical breadboard of the vacuum cube plate. This allows optical components inside and outside the vacuum cube to be easily aligned and integrated. The rail can be mounted on any side of a compatible vacuum cube plate and includes 1/4"-20 thru holes for mounting a standard 1-inch optical table breadboard pattern. It is manufactured from durable 6061-T6 aluminum. Common Dimensions & Specs: Width: 1.5 in. Length: 3.7 in. Thickness: 1.0 in. Material: 6061-T6 Aluminum Compatible Vacuum Cubes: 6x6 and 9x9 Mounting Holes: 1/4"-20 thru holes Counterbores: For 1/4 in. socket head cap screws on each face

Ideal Spectroscopy Optical Breadboard to 9x9 Vacuum Cube 7 in. Long Adapter Rail, 6061-T6 AluminumThese optical breadboard to vacuum cube adapter rails allow optical breadboards to be mounted directly to the exterior of a 9x9 vacuum cube plate. This provides a convenient way to add optical accessories and create custom experimental setups around a vacuum cube. The adapter rail positions the external optical breadboard surface to be coincident with the interior optical breadboard of the vacuum cube plate. This allows optical components inside and outside the vacuum cube to be easily aligned and integrated. The rail can be mounted on any side of a compatible vacuum cube plate and includes 1/4"-20 thru holes for mounting a standard 1-inch optical table breadboard pattern. It is manufactured from durable 6061-T6 aluminum. Common Dimensions & Specs: Width: 1.5 in. Length: 6.7 in. Thickness: 1.0 in. Material: 6061-T6 Aluminum Compatible Vacuum Cube: 9x9 Mounting Holes: 1/4"-20 thru holes Counterbores: For 1/4 in. socket head cap screws on each face

Ideal Spectroscopy Optical Breadboard to 12x12 Vacuum Cube 7 in. Long Adapter Rail, 6061-T6 AluminumThese optical breadboard to vacuum cube adapter rails allow optical breadboards to be mounted directly to the exterior of a 12x12 vacuum cube plate. This provides a convenient way to add optical accessories and create custom experimental setups around a vacuum cube. The adapter rail positions the external optical breadboard surface to be coincident with the interior optical breadboard of the vacuum cube plate. This allows optical components inside and outside the vacuum cube to be easily aligned and integrated. The rail can be mounted on any side of a compatible vacuum cube plate and includes 1/4"-20 thru holes for mounting a standard 1-inch optical table breadboard pattern. It is manufactured from durable 6061-T6 aluminum. Common Dimensions & Specs: Width: 1.5 in. Length: 6.7 in. Thickness: 1.0 in. Material: 6061-T6 Aluminum Compatible Vacuum Cube: 12x12 Mounting Holes: 1/4"-20 thru holes Counterbores: For 1/4 in. socket head cap screws on each face

Ideal Spectroscopy Optical Breadboard to 12x12 Vacuum Cube 10 in. Long Adapter Rail, 6061-T6 AluminumThese optical breadboard to vacuum cube adapter rails allow optical breadboards to be mounted directly to the exterior of a 12x12 vacuum cube plate. This provides a convenient way to add optical accessories and create custom experimental setups around a vacuum cube. The adapter rail positions the external optical breadboard surface to be coincident with the interior optical breadboard of the vacuum cube plate. This allows optical components inside and outside the vacuum cube to be easily aligned and integrated. The rail can be mounted on any side of a compatible vacuum cube plate and includes 1/4"-20 thru holes for mounting a standard 1-inch optical table breadboard pattern. It is manufactured from durable 6061-T6 aluminum. Common Dimensions & Specs: Width: 1.5 in. Length: 9.7 in. Thickness: 1.0 in. Material: 6061-T6 Aluminum Compatible Vacuum Cube: 12x12 Mounting Holes: 1/4"-20 thru holes Counterbores: For 1/4 in. socket head cap screws on each face

Optical Breadboard 12 x 24 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 12 x 24 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Seven counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Six holes are positioned around the perimeter, inset 1 inch from the edge, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 12 in. Length: 24 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Seven for 1/4 in. socket head cap screws Counterbore Locations: Six around the perimeter inset 1 in. from the edge and one in the center Flatness: 0.006 in. over 1 ft2 NOTE: Due to its size and to avoid any damage, this item will ship via Freight only.

Optical Breadboard 18 x 18 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 18 x 18 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Five counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Four holes are inset 1 inch from each corner, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 18 in. Length: 18 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Five for 1/4 in. socket head cap screws Counterbore Locations: 1 in. inset from each corner and one in the center Flatness: 0.006 in. over 1 ft2

Optical Breadboard 18 x 24 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 18 x 24 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Seven counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Six holes are positioned around the perimeter, inset 1 inch from the edge, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 18 in. Length: 24 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Seven for 1/4 in. socket head cap screws Counterbore Locations: Six around the perimeter inset 1 in. from the edge and one in the center Flatness: 0.006 in. over 1 ft2 NOTE: Due to its size and to avoid any damage, this item will ship via Freight only.

Optical Breadboard 18 x 30 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 18 x 30 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Seven counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Six holes are positioned around the perimeter, inset 1 inch from the edge, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 18 in. Length: 30 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Seven for 1/4 in. socket head cap screws Counterbore Locations: Six around the perimeter inset 1 in. from the edge and one in the center Flatness: 0.006 in. over 1 ft2 NOTE: Due to its size and to avoid any damage, this item will ship via Freight only.

Optical Breadboard 18 x 36 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 18 x 36 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Seven counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Six holes are positioned around the perimeter, inset 1 inch from the edge, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 18 in. Length: 36 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Seven for 1/4 in. socket head cap screws Counterbore Locations: Six around the perimeter inset 1 in. from the edge and one in the center Flatness: 0.006 in. over 1 ft2 NOTE: Due to its size and to avoid any damage, this item will ship via Freight only.

Optical Breadboard 24 x 24 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 24 x 24 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Nine counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Eight holes are positioned around the perimeter, inset 1 inch from the edge, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 24 in. Length: 24 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Nine for 1/4 in. socket head cap screws Counterbore Locations: Eight around the perimeter inset 1 in. from the edge and one in the center Flatness: 0.006 in. over 1 ft2 NOTE: Due to its size and to avoid any damage, this item will ship via Freight only.

Optical Breadboard 24 x 36 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 24 x 36 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Nine counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Eight holes are positioned around the perimeter, inset 1 inch from the edge, with one additional hole located in the center. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 24 in. Length: 36 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Nine for 1/4 in. socket head cap screws Counterbore Locations: Eight around the perimeter inset 1 in. from the edge and one in the center Flatness: 0.006 in. over 1 ft2 NOTE: Due to its size and to avoid any damage, this item will ship via Freight only.

Optical Breadboard 24 x 48 in., 0.5 in. Thick, 1/4"-20 Tapped Hole Array, Anodized AluminumThese non-magnetic blue-anodized aluminum optical breadboards provide a compact and low-cost mounting platform for small optical assemblies and laboratory setups. The breadboard measures 24 x 48 inches and is 0.5 inches thick. The surface has 1/4"-20 tapped holes arranged on a standard 1-inch optical table breadboard pattern, with the first row of holes located 0.5 inches from the edge. This standard pattern allows optical mounts, posts, and other components to be easily positioned and secured. Fifteen counterbored holes are provided for mounting the breadboard using 1/4-inch socket head cap screws. Twelve holes are positioned around the perimeter, inset 1 inch from the edge, with three additional holes located along the center line. The counterbored design keeps the screw heads below the top surface. These holes can also be used to attach pedestals for use as feet. The breadboard has a specified flatness of 0.006 inches over 1 ft2. Common Dimensions & Specs: Width: 24 in. Length: 48 in. Thickness: 0.5 in. Material: Non-Magnetic Aluminum Finish: Blue Anodized Tapped Holes: 1/4"-20 Hole Pattern: 1 in. standard optical table breadboard pattern First Row of Holes: 0.5 in. from edge Counterbored Holes: Fifteen for 1/4 in. socket head cap screws Counterbore Locations: Twelve around the perimeter inset 1 in. from the edge and three along the center line Flatness: 0.006 in. over 1 ft2 NOTE: Due to its size and to avoid any damage, this item will ship via Freight only.